Anyone else that can chime in? I added 15 to the torque tables and it helped a lot. Stutter isn't as present. Not sure if that helped or not
Type: Posts; User: Joepeinado
Anyone else that can chime in? I added 15 to the torque tables and it helped a lot. Stutter isn't as present. Not sure if that helped or not
How much increase and decline per table? Would 10% on each table be good?
Here is my evening log on the way home and the changes I made on the tune.
put back stock 02 settings along with some timing that was mentioned before.
the hesitation is still there though, did it...
for whatever reason, it wont let me upload the file now. File might be bigger than the allowed size, but here are some screenshots of the MAF values that are currently in my tune. They all check out...
I did mess around with the over/under speed, will put it back to stock.
My issue is on part throttle-WOT. It coughs, stutters a bit and then picks up again, but wont do this when in open loop.
cam...
Checked 02 location, when unplugging bank 1, it throws a code for bank 1. They're located in the proper section. I will upload today's run and the last maf run in open loop to compare
Went to stock 02 sensor settings. I'll flash it in the morning and log another run
I have not, but when they were stock, I had the same issue. I started reading a thread that has something to do with "02 tuning" and modified the tables. Guess they're moving slower? I noticed that...
Hello all,
I've been a long time lurker and reader and have picked up some knowledge on tuning. I have done a couple of cam swaps and street tunes that have turned out good. I currently have a...
Yeah, it does have a lot of BRAF, i will lower it by two grams to see if it gets better. i had originally put the fans on that setting because the car wanted to turn off when turning on the AC. It...
Well, looks like I got it. I filtered out info that was screwing my readings. Check it out and let me know what you think. At this point, if I move it any further, I think I might not be able to get...
This is the closes i have gotten. Ignore that huge lean cells, i was bucking it at 6th at around 30mph i think. If this is ok, i will call it a day
I am still at it. cant believe this has taken me so long and im still not where i want to be. i want to be in the rich at -2 or -3 percent but u am currently on the lean side 2-3 percent. its...
alright,I went out and data-logged a couple of times. Here are the latest data logs. The one that has the histograms almost full was the 2nd to last log I did and then I made some adjustments and the...
Hondaeater, I have added the channels to the scanner and I logged another run when I was out to lunch. I will try an keep a steady foot when letting off or shiffting so that the TPS is reading...
Ryan, If I move over to 1.18, will I have to re do the whole table again? Also, the ECT table you are talking about is the correction table under "Base Corrections"? I attached a screenshot
Good evening everyone, here is my latest tune. I was data-loging today for about 2 hrs. I think I'm getting closer to getting the VE table in line. I just cant wrap my head around the adjustments. If...
Hondaeater, take a look at my current tune. I have not made the changes you posted since ive been tuning the VE table and idk if this will affect it in any way. question, is my ve table supposed to...
But yes, it's better to start over. Well, at least if your car runs like ass like mine did then it's better to start over. The previous guy was tuning without a wideband and he was tuning with a...
I started all over again. I attached the correct file but uploaded the incorrect one yesterday. I actually uploaded the maf tune 2 and my readings seem better and car runs better. No more stalling....
well i have changed my tune somewhat from last time i posted. Here is where i am at right now, I was able to get my maf dialed in a bit. I read somewhere that when dialing in the maf that it is...
Thanks for the pointers! Went in there and made some adjustments but I couldn't stop it form flaring even after only adding very little, so I returned it to the previous tune. I lowered my timing at...
Ok I just zeroed the burst knock and rpm tables.
Thank you for taking a look! What do you mean Max out on the burst knock table? By what value and under "enable delta cyl air" or "vs rpm? Just modified the fans and matched my be tables. Still...
anyone?