I am not at my truck at the moment. However can someone post or send the injector data for an E67 PCM using 2010 corvette injector data. The last tuner had different data from the conversions I...
Type: Posts; User: ssdungeon
I am not at my truck at the moment. However can someone post or send the injector data for an E67 PCM using 2010 corvette injector data. The last tuner had different data from the conversions I...
So I have watched several videos and with the older gen 3 stuff I didnt have this issue.
This is the scanner setup for an e68 pcm trying to tune VVE
I have 2 issues the main one is something is...
I have an 07 trailblazer SS
I need the injector data for a 2007 z06 ls3 oem injectors. The TBSS has the e67 pcm.
If anyone can help I would appreciate it.
I see the data for these on other pcms...
I see the collaboration details is for a 2000 Camaro. Im not quite sure what would cause all of these gauge issues.
The harness looks just fine but I will check the rest of the wiring.
The story a performance shop put in a 2000 wire harness and a 0411 PCM. Since I got the car back. It runs OK but my speedo does not work.
Question 1 - When I do the segment swap will it change...
For being so ...... i shouldn't be allowed to post again. :crazy: When the screen would open the speedo tab is not visible until you go FULL SCREEN. I did a pretty good job tuning about 18 months...
Whats up man... you helped me years ago with my fueling.
I have it on advanced.
I went to edit-view-advanced.
The only place I can find the speedometer tab is edit-navigator-then the last...
I use to be able to change my gear ratio under the speedo tab. I could input the gear change or the tiresize....
Now this is all I get under speedometer. It has been a long time but I have spent...
Thanks I just did a double post because I forgot I already asked this here....
1. Does anyone have the fueling tables for the FAST46lb injectors ls2 style.
2. Would it be the exact same as the 46 ls2 OEM injectors?
3. If so what cars came with the OEM 46lb ls2...
I am now going from a ported FAST 92 with 42lb green top injectors to FAST 46 pound injectors. I have to go back through the tune because since the last tune its had 2" Kooks added and this fast 102...
Im curious to know whats set up differently on returnless vs. return style systems.
No he explains it above. GMVE does not matter as much for the cylinder volume.
VE tables matter.
My question is the engine "type" when changing the base block displacement should we change the...
Thanks James :)
But in your case your initial block never changed. You just stroked it.
My question is when you move from a 5.7 based block to a larger 6.0 or a 7.0 based block... whether you...
Legend says change the volume but what about the Type for the older ECMs?
If the block is a 6.0 block stroked to say a 408
The Cylinder Volume is .83611
if the original engine was a 5.7 before...
[QUOTE=waynehartwig;293928]I'll share what I have... I think it's BS that others won't :slap:
Everything is top secret...sshhhhhh :secret::secret::secret::secret: There are a few that will help...
Im not sure if I have the cam phaser or not yet. Ill have more tuning time this weekend. Should I retard it around 2 degrees? and just lean it out up to 3000 RPM?
I hardly get past 3200 even in...
:cheers:
Here is my custom histogram. For some reason. KR is recorded but wont populate vertically.
Can someone tell me why is this?
Cyl Air Mass g/cyl is what its not populating. All data is loaded...
I did pull a few im running at around 23 degrees right now. Compression is 11:4:1 93 octane only.
My VE table is high as giraffe ass right now. I have cells from 117-125. with the 1.225.
For my 408 in the sig. The vette. Right now I have my PE table 1.225 across the board.
From reading 1.18 is where an NA motor should be.
The car will one day host a pretty large direct port...
I have been ATTEMPTING to tune with narrow bands for a while. I have had 3 Lc1s and never got any of them really hooked up. My car 1997 C5 vette....currently runs fine idles fine... its a little...
Can someone tell me what gears are in the car if 6.08 was the magic number? No calculations I have done have come close to that number.
Could 4.56 gears be in the car.
For the record I...
OK my car idles just fine. No surging.
1998 Z in the sig.
I ran the following cfg along with several others I get values waaayyy different than whats currently there. So different im afraid to...
Could there be something wrong with my guages period.