Ok thx, I ordered a Maptuner Nano BRP to remove the speed gps , and I'm waiting to be able to flash soon with my MPVi3 the stock 325 ECU.:pray:
Change to a 2023 ECU and the harness is too...
Type: Posts; User: Yann45
Ok thx, I ordered a Maptuner Nano BRP to remove the speed gps , and I'm waiting to be able to flash soon with my MPVi3 the stock 325 ECU.:pray:
Change to a 2023 ECU and the harness is too...
Hi
i sold my RXP X 2022 and waiting about delivery to my new RXT X 325 (international model France)
What about the future possibility to reflash my ECu with my MPVI3 interface, for the moment the...
Since i ve set my supercharger clutch slip to 14 ft.lbs ( 19Nm) all it's fine, because the stock value was under 7 ft lbs (9.5Nm) , that why explained i take 8400/8500 rpm but no more speed than at...
If you dont pass 8500 RPM retainers are not necessary
Stock the rev limiter is 8050 rpm but in the water full engine load 8150 +/- max on the dash
On the trailer or when coming unhooked the real cut off is 1000 rpm more high
My rev limiter is at...
Hi guys
if you only increase the rev limiter and increase the speed limiter at the max is not enought for reach 8500+ RPM
In real stage 2 tune like RIVA for example you raise the spark advance at...
129538
82 mph (132 km/h) on the dash (129 kmh on a real GPS) @8400 rpm with stock impeller (pitch 14/22)
Give me your email adress
Thx
I see 799$ (special offer) is it for VCM edit hpt file ?
THX
129317
Very Strange there is 8 variants (0 to 7) with 2022 stock file only in the speed limits
See the new screenshot i have 8 variant and stock file RXP X 2022128977
I fix the problem with the HPtuner support,i go back to stock firmware, read the vehicule again and the server send me the good file :worship:
Who have a stock HPT file from a RXP X 2022, because like my ECM is already tuned their server send me a 2019 HPT file Operating Sytem 7A1163PC7FOS1, and the stock operating system number (firmware)...
HI guys for information there are 4 variants : 0/1/2/3
I think variants are :
Variant 0 is default map when map sensor failed or high ECT, low voltage battery, hight IAT : when the ECM detect a...
128692128693128694128695
I've used KTAG interface ( Chinese clone) for extract the MAP from my ECU, you can copy all the ECU or separate the map than the eprom.
I paid 50 tokens for use the HPT software Tune Translation :...
On the HP Tuner website he talk about Tune Translation for convert a log .bin file to.HPT file, and it cost 50 tokens
Upload your binary files and download converted .hpt files to use with our...
And is it possible with a MPVI3 HP Tuner interface for read out a .bin file? And for convert to HPT file which software can do it?
Are you sure because i ve already a tune Stage 1 on my RXP X 2022 , and if HP Tuner send me a stock file : no interest.
the question is what this value "GPS adder" modify ?
i don t think that the cruise control value restricted the speed in sport/touring mode, only if you run the cruise control mode
See this...
hi guy
i've a Dius reflash 8400 RPM stage 1 on my RXP X 2021 hit 81mph on the dash, on my GTX 300 2020 hit 83mph at 8300rpm with this same Dius Reflash, but on my RXP X 2022 hit 8400 rpm but...