aaaand big vacuum leak, also had them set to mil on second. I switched them to mil on first no change, found a vacuum port that i forgot to plug, runs like a top. thank you sir!
Type: Posts; User: JesseB4533
aaaand big vacuum leak, also had them set to mil on second. I switched them to mil on first no change, found a vacuum port that i forgot to plug, runs like a top. thank you sir!
Just got the first jeep i ever built back and the 4.8 was siezed. i found a stock 5.3 to replace it and tried to use the 4.8 tune. The original tune that was on the 4.8 (stock motor) was created by...
I searched, none of the posts had any solid answers. Most were just people not being able to get the scanner to read the Wideband at all. This is the first clear answer I?ve seen I?ll give this a...
I have an Aem Wideband hooked up via prolink, the gauge registers in the PID column but I can?t find a way for it make a graph or something I can use to copy/paste my changes similarly to how I have...
Hey all, got my wideband installed, its an aem 30-0334. It?s reading in the scanner on the left column where the PID's are listed but i cannot get a table to work. I hooked it up to the red input...
I just went to write a new tune on my race truck, it is the only vehicle I?ve ever tuned with my interface and it?s giving me an error saying the vehicle is not licensed. The only difference from...
Thank you I will check these out
How are you guys connecting a wife and to the mpvi 3, I figured this would be straight forward to figure out but I?m not finding the answer. I have not purchased a wide and yet so open to...
How are you guys connecting a wife and to the mpvi 3, I figured this would be straight forward to figure out but I?m not finding the answer. I have not purchased a wide and yet so open to...
i like the quick external adjustability of the LNC and with the small shots im running i think the tune will always be close enough. These are super short burst of nitrous for short course off road,...
thanks guys, thats the info im looking for! I looked and the lnc2000, it seemed like the way to go but i figured HP Tuners could do it as well. Im thinking the LNC is the easy way to get there and...
I realized after I wrote the post that kpa is not correct. What am I looking for specifically? I?m going to the track this weekend for a shake down run, would it be worthwhile to just log it, take...
Yes and yes*
Do you mean a run that only logs WOT aka set the logging trigger to be at TPS at 100%
Hi, new to the forum (first post) and super green to tuning. Im looking for some help with adjusting my current tune to run some nitrous. The engine is an LQ4 based build and has already had dyno...