Search:

You need to log KR buy cyl. To rule out injectors. Are you fighting fuel pump issue's ????How is a log at WOT KR ing like crazy???

Here is mine. It does the samething . I have 3.70 and a 3600 stall convertor

why I asked was I have a set of 275/40r17 BFG drag radials and they are 26in tall.Didnt know if it would screw up the shifts.

??? What do your tire height's read in speedo mine is 26.2 But the 245-40-R19 are 27 inches tall

Here is mine

I have them in my G8. Ian "The tuner school" and I have been trying to get them straightend out
just looking for another persective. On the highway its only a 500 bump in cruise rpm.

Does anyone have a G8 with A6 and 3.70 gears.So we can compair trans tunes.


Thanks

Thanks and sorry of the thread

If you programed your car when you take it in for warranty work?? On my pontiac all the stock calibration #'s match the one's in my car know. Just a Dumb ?????

Have a 2009 G8 1 7/8 long tube's no cat's into Corsa Cat back Cam, CNCed heads OTR CAI 160therm Underdrive pulley. The Tr6 log was before taking 6 deg of timing out at wot from 3500 rpm up. The wide...

When you change this. Do you also have to change Dyn. air also. Or does Maf/freq correct Dyn air also ?

I also log dynamic. blackgmc where do you adjust MAF . sorry for the ??? just getting started

Dumb Question "newbe" are these two values on a log supposed to match or be close???

Thanks will try it

2009 G8 1 7/8 long tube no Cat's CNC heads decked .15ths Cam 577/587 111LSA and lifters no DOD. Ported TB. OTR cold air, Intake port matched. I dont have a WB. I know need one!!! No she hasnt been...

Can you guys look at my tune and logs and give me some pointers

Thanks

Sorry for the Dumb ? Where would you take out fuel if you are rich at idle??

I saw that after my bad bill sorry

Pm sent with serial# Beta please

I contacted Support but didnt get a answer:shrug:

When reading VCM gets to "prepairing VCM" then I get a "Failed". Does anyone know why?

Working on 2009 Pontiac G8 6.0 auto

Thanks

Have emailed and left messages. With no replys now what?????:banghead:

Recieved my Vcm suite from HP today. But never got my application key and the seriel number on the box isnt working.

They are listing #12591290 as spchg air inl presure #12592525 is spchg air otlt press.From the pic in the catalog both are retained by a screw. Dont know if that helps