I am having an issue getting the T42 computer to run the 4L65E transmission. I seem to be communicating and programing the computer with HP tuners but the T42 doesn't seem to be controlling the...
Type: Posts; User: dragracn
I am having an issue getting the T42 computer to run the 4L65E transmission. I seem to be communicating and programing the computer with HP tuners but the T42 doesn't seem to be controlling the...
Thank you, tried searching for info but not with the proper wording I guess.
I tried to license a 2015 Cadillac Escalade yesterday and am having issues, any help would be great. I had 2 credits available, licensed the truck, it asked for two credits, after licensing it, it...
I have a turbocharged gas truck I use to tow with, I have been trying to richen it up at low RPM throttle and boost situations thru the BE, I can get it to command richer AFR thru the BE but because...
3.2? Its an exhaust back pressure sensor. Factory ford sensor.
Can I get some help setting up pressure sensors. I have got one setup by using an AEM sensor input. But I have a sensor that is 40PSI max and cant seem to get it set up. I did download a program that...
Thanks guys
Does V3 have RTT? I cant seem to find it anyplace?
MAF is post blow off valve. they are about 6-8 inches from on another. IAT sensor is after MAF just before throttle body. I haven't maxed the MAF yet but am close 11,500ish.Hz I was going to try the...
Mine picked up alot of Knock also when i first swapped the computer. I compared the knock sensor values to an 2002 8.1 and adjusted them. I'll see if I can get tune posted tomorrow. I have got it...
I knew I was just missing something simple. I assumed the boost enrichment worked off the MAP signal only, I had to set the TPS enable back to a low setting to get boost enrichment to work. Funny it...
Would like some help still please. I switched the OS to 2bar, installed 2bar map, changed PIDs in scanner to read 2bar map, I am seeing 2bar data in scanner. Can also see MAF data on scanner. I put a...
I was just looking thru the different OS and in "2bar MAP - Speed Density" I see alot of MAF values still? Is it possible to run a MAF in that "2bar MAP - Speed Density" OS. I know if I run over...
Min spark is -15. I messed with it yesterday some and went over some old logs, it seems as thou when it starts to build boost the cyl airmass jumps up very quikly (faster then the computer reads??)...
I have calibrated the MAF. The spark issue is one of the reasons I was wondering about going to SD, timing will not go below 10* no matter whats commanded. I can go over 10* and it will go to what...
Been lurking the site for a while now. I have read alot of the post about running a MAF with forced induction but am still not sure which way to go. I have been tuning for a while, not great at it...
Is there an advantage of buying direct thru HP tuners or another big tuner that sells HP program? I have no one close to local. I see Summit has them ready to ship which means I would have it in two...
Downloaded it on my PC this morning and got it to work, I'll have to reinstall it on my laptop and see what happens. Thanks
I cant seem to open any file? it gives a failed validation message?