Search:

Thanks, I didn't even think about that! I'll look into making the changes

Figured it out, was low on fuel :doh:

Started truck up with 8-10 gallons of 93/E85 mix in it, idled and cruised around awhile before I got into any sort of boost.

Tank level was reading...

Yeah, I'm going to eliminate the burst knock and start making adjustments to my VE and timing. Just getting my feet wet with tuning with boost, so being careful!

Well thanks, I'll try disabling the burst knock and see if it helps my issue

I had actually changed it back before I began driving, just didn't upload the correct tune. I didn't change the ECM 12400 PE ratio because I thought the Boost EQ Ratio was the table I'd be using...

Here's the correct tune file to go with that log

138512

Crap, you're right, thats the wrong file. I'm posting the correct one now

Sorry, I'm running the following stuff:

GM 2bar MAP sensor PN# 19418810
FIC 1650cc Fuel Injectors
-10an feed to a y-block, then -8an feed to the rails, then -8an return thru a magnafuel...

Hello,

After about 8 months of parts sitting on the shelf, I finally finished my D1X procharged 5.3L 2006 Silverado. I'm running a 2bar OS with an overkill E85 Fuel system. I think I've entered...

Just wanted to report back that the new throttle body seems to have fixed my issues. I disassembled the non-gm throttle body that I had on the truck, and it appeared to be a quality piece

I didn't know that. I was watching some videos regarding GM vs Parts store throttle bodies, and they didn't appear to be the same when they were disassembled. Not sure if that applies to every...

I actually just ordered an oem gm ls3 throttle body. I’ll see how things go when it gets here next week! The people who make the x-link recommend gm brand throttle bodies. Figure buy once, cry...

I think that it is, but I'm not 100% sure. I definitely thought of throwing a new one on to rule it out, but figured I'd give diagnosing a shot. I added TPS voltage PID to my vcm scanner and its...

Thanks for that @blindsquirrel. I'll take a look at the voltages and see what I find.

I for some reason just remembered that the previous owner of the engine I pulled this TB from, was...

The truck was running perfectly before the intake/tb/x-link swap. I've checked the connections and all appears to be intact and clean/free of corrosion. I didn't do any voltage checks for that...

updated the original post with the current tune and a log file of the drive I just took. It went into reduced engine power numerous times while stopped during this log. I noticed throughout the...

I got rid of the wall of text I posted last night. Hopefully someone can kick me in the right direction with this!

Over the weekend, I replaced the factory intake and 78mm tb on my cammed 2006 Silverado L59 5.3L with a tbss intake, 87mm gold blade throttle body with an X-Link, and a Volant CAI. I've been dealing...

Thanks for the insight, I'll take a look and make a few changes. I did some more MAF tuning before I uploaded these files, and the truck didn't seem to care for them while in open loop. So gotta...

Haha, I have plans of getting a supercharger over the winter. Just feel like I'm missing something here. I'm hoping my converter loosens up a little with more power. The trans shop locally builds...

Hi all,

I've been enjoying my 06 Silverado RCSB over the summer while tuning and making tweaks to what I've done so far. I've had some hiccups along the way, but have gotten this far with the...

Just wanted to reply back, the suggested changes corrected my issue! Now back to polishing up the tune at the higher rpms. Gonna try and hit up the local dragstrip this week and do some logs. ...

That?s odd, it doesn?t show an rpm on mine, only an mph

I can't believe I didn't see those. I've changed them to 6700rpm limit with resume to 6650rpm. I'll have to test when its not raining out before I report back with results.

I don't see where...

Hi all,

I've been having an issue with my 2006 Silverado 4L80e swap and a no shift condition at WOT. I've been using the blucat tool and on the tune uploaded, I did the math manually. I'm using...