I found out on my 2010 Sport Trac only tables 5 and 10 need to be changed. I started with only 5, but it would sometimes do weird things. Changing 10 fixed that.
Type: Posts; User: calculate
I found out on my 2010 Sport Trac only tables 5 and 10 need to be changed. I started with only 5, but it would sometimes do weird things. Changing 10 fixed that.
I'm not sure what you're saying. I happen to be tuning an Adrenalin.
I have cracked the code for ultra-fast shifts. Time Ramp Scalars are the key to everything. Numerically lower is faster, and 0 will have it shifting fast enough to snap your neck.
Basic steps...
I have finally figured out that Shift Table 5 is the only one used for normal 2wd and 4wd during both normal driving and WOT. Every first gen 6R80 owner needs to know that. I'm going to see if the...
I'm starting to paint a picture of how to control shifts now. I just spent some time comparing the 2010 Expedition tune in VCM to my 2010 Sport Trac tune in Advantage (same TCM). They each have...
Yes I have PRP with access to all parameters.
I have a 2010 Explorer Sport Trac. Expedition is very similar, I've been comparing the HP Tuners file against mine. Haven't found a Sport Trac HP tune yet.
I would love to do all those things you...
No I don't.
Take a look at these pressure tables. I can't find a way to translate these to the phases of a shift.
118316118317
My goal is to speed up shifts at half and WOT because as-is I lose a LOT of...
The first gen doesn't have oncoming or offgoing pressures, at least described as such. There's a pressure table, but no indication of when each value would apply.
So would numerically increasing these values help speed up shifts? In other words that would increase the ramp rate? What would the offset tables control?
That spreadsheet absolutely works, but if you apply your values to every table you'll have problems with things like cruise control. This is why we need to know which table is used under which...
Can someone please explain what these values mean? I don't have "ongoing clutch" or "offgoing clutch" or "tcc ramp rate" or anything like that. This is SCT software btw and you're looking at the 12...
Any luck figuring this out? My 2010 Explorer is very similar with 30+ tables. My educated guess is that there's a table for every drive configuration. 2wd, 4hi, 4lo, o/d button, WOT, gear selector...
Does anyone here know how to tune the 1st gen 6R80? Looking for clues on how the TCC table works (and why there's four of them) and a few other areas.
I can help a little but I'm using SCT software. Remind me later and I'll send you a spreadsheet you can use to adjust your shift tables. I'm working on identifying when each table is used. Only a few...