So I made some changes to my cam timing following Hemituna's example in the post below. I literally copied over the cam timing settings for the Whippled 6.4 and subtracted 5.5* to account for the...
Type: Posts; User: jhodges275
So I made some changes to my cam timing following Hemituna's example in the post below. I literally copied over the cam timing settings for the Whippled 6.4 and subtracted 5.5* to account for the...
I've done a ton of research on here and read a lot of good info on cam timing from several the hemi tuning veterans but.....I still don't really know where to go with my tune. I have a 2016 Ram 5.7...
Exactly what guru1oftal said. I had the exact same thing happen by following the Tuning Schools instructions while tuning my 2016 Ram. I changed this table back to stock and the surging went away.
A lot of it is personal preference. There are a ton of people running tunes from one extreme to the other and everywhere in between. Keep in mind that most of the Torque Management from the factory...
I pretty much always start by disabling Fuel Shut Off (FSO), Electronic Throttle Control (ETC) and Stall torque management under the engine Torque Management tab. If you want no torque management,...