I understand and figured it would come to this. I just wanted to make sure it wasn't possible before adding another module. I do really appreciate the help. would you recommend the controller you...
Type: Posts; User: twistedtx
I understand and figured it would come to this. I just wanted to make sure it wasn't possible before adding another module. I do really appreciate the help. would you recommend the controller you...
same result after making changes in tune file posted above. provides ground immediately after ignition is turned on. cannot force to turn off using scanner.
yes, you are correct, I didn't need to segment swap but I knew it would catch anything I could have missed. I used a tune from the repository and compared several before making the changes. please...
138410
I got the fan to run on the bench and can do so with the diagnostic wire. it takes several seconds with power applied for them to do anything and that's why I couldn't confirm they worked prior.
I...
I honestly figured that setting disregarded the other tables. so yes that's exactly what I did. Could you point towards that tables that need changing?
I just changed to discrete and attempted to trigger a change with HP scanner.
I had no connectivity prior to ignition and once i keyed the car on it went straight to ground. I could not get the...
For the record, pin 58 has given absolutely zero action. it has never changed one single time regardless of my settings. That leads me to believe there is something internally wrong in the ecm.
I...
I have done nothing with the AC tables at all so that could be part of the issue.
Okay, Ill try to follow step by step for clarity if anything else. I had no idea there was any remote tuning protection in this tune and I hope I have removed it now. 138386
On the bench and on...
138380
maybe tune file will show up now.
is it common for an ECM to not be able to provide the correct signal?
I have inverted the table values already with no luck.
when wired up and ready to go the white wire shows 12v and I get nothing when applying ground to that signal wire. I grounded the fans to a...
I know this is a dead horse but after looking through all of the posts and tech I still cant figure out what is wrong with my wiring/tuning. Recently installed aftermarket brushless spal fans on my...
I am not running the alcohol sensor for simplicity sake because we want to eliminate every possible failure as much as possible. So we are running pure race E85 all the time(which may have been a...
I have the fuel issue fixed now and things are better but still having a hard time getting the driver demand just right.
94412
So the top circle is my MAF and the bottom right is the Tmap. Its...
So this car is a long story but our current setup is 2016 LTG to 6L80e transfer-case etc....
We have had some success with the combo but we are looking for the last little details now and we have...
Hey guys,
I am doing a stand alone setup on with the powertrain out of a 2016 Cadillac ATS including the 8L45. I cannot figure out the Pin in the TCM to hardwire the tapshift. Is there anyone that...
Hey guys,
I am doing a stand alone setup on with the powertrain out of a 2016 Cadillac ATS including the 8L45. I cannot figure out the Pin in the TCM to hardwire the tapshift. Is there anyone that...
So I wanted to give everyone an update on the solution to this problem. after many weeks of beating our heads against the wall we finally just decided that we needed to try a new ECM. This process...
I have done the twisted pair for the MAF already and it didn't seem to have any result. At one point I had this harness complete meaning that all the oem harness was covered with the oem loom and...
Here is the log[ATTACH]78617
I have tried to post the log and some pictures but its not working. So hopefully this time it will work.
TurboCobalt.... I have replaced the sensor(twice) and really checked the wiring but I...
Yes I will attach a log but when playing the log back it all looks stable and normal. I have replaced the sensor with an AcDelco.
I have been trying to shield the wiring but i haven't done the...
Here is a video of the data log.
https://youtu.be/jU3u0UF1G2k
Yes it is in the correct direction. I actually tried it backwards just looking for an issue and it didnt help.