Search:

I added aircharge to the list, but cylinder air mass reads identical to aircharge.

I meant to say in the original post I didn't tune it, and I haven't changed anything in the tune. Is there...

I'll have to check im on my phone right now, but I'm pretty sure I logged aircharge. That data log was the first time I used the mpvi 3 to standalone data log instead of data logging with my mpvi pro...

I need some advice and opinions on a hellcat. It's a 2016 with a 2.85 pulley, Jlt intake, blower spacers, gutted cats. It still has stock injectors, I know it's stupid it has stock injectors with a...

Yeah, there's one on ebay for $99 bucks. I ain't touching that crap

Do you know if any of y'alls dealers has a better price than that? So far that's the best price I've seen, it's been from that $218 up to $300 what I've found so far.

Getting ready to yank the trans tonight, this is the right tow, drive, and race kit you where taking about right?138283

You're looking at the tune that was in there before the tune thats in there now that Greg made all the changes too.

I didn't change the shift time because it as always shifted at .125 to .175 milliseconds WOT on the data logs.

I figured you were, just wanted to make sure

Sorry, I wasn't talking about you. I was talking about dealing with Pat. I haven't emailed you yet, I will email you tonight or tomorrow.

Ok, yeah it was him. Took just about 3 months to get the first tune, he only sent 5 total over 6 months time. I'd have to send 2 or 3 emails and text to him before he would answer a question. Had to...

How much would it be for you to fix it? I want to learn how to do it, but I'm getting tried of trying to fix the crap and get everything dialed in that should have already been dialed in by the one...

Haven't messed with the tune any this week. Where do I need to start to get the torque model's closer? Do I just need to have a torque histogram? I want to try and have the torque model dialed in...

I haven't seen it like that before, I'll definitely have to figure how to data log like that. Thanks for all your help on here!

Time on the log was 3:07:14, I was just going to put a picture from my phone on here but it won't up load

The weight is a big factor to, dang truck is right over 5400lbs

Have you ever seen one pull all the fuel and put that much timing in at WOT? Also, it felt great not pulling any timing on the shift, It was pulling about 10 degrees before. You could feel the...

Yeah, I know you don't want any slip when holding. But I just want to make sure it's not slipping to much when it's WOT.

Dang, that's what I figured. How much is it supposed to slip WOT? It's always been about 2000 rpm, is that about right or is that to much? Thanks for all the help!

Here's two logs, 1st one is getting on it hard 2nd one is driving less than 50% throttle. It's mostly slipping going into 5th gear now unless its around 30% throttle. Felt good WOT but on the 2nd...

Got about 14 miles on it right, I'll put a log on here tonight once it learns more

Thank you, that was a lot of changes. I will try it in just a little bit and see how it does. Since it's showing the engine torque so high now does torque model need to be drop some if this tune...

It does say Calibrated Success in the top corner when I opened the injector data file.

I'm done for tonight, been messing with this crap for almost 12 hours today, still can't get to upload the log. I'll have to try tomorrow.

Until I get the main log on here that it's not letting me upload. Here's a short log and a crappie run from the track Thursday, blew the tires off as soon as I let go of the two step.

136813 ...