Hi all sorry if this has been asked a few times but some of the posts are old and not exact info ,
Trying to turn off security in a 2010 300c 5.7
I?ve tried disabling skim and skim capable tab...
Type: Posts; User: sideshow
Hi all sorry if this has been asked a few times but some of the posts are old and not exact info ,
Trying to turn off security in a 2010 300c 5.7
I?ve tried disabling skim and skim capable tab...
hi all i searched and found a post regarding immobiliser bypass on a 2002 jeep grand cherokee 4.7 v8
and they said sct can do it and hp tuners cannot
but this was in 2016
just wondering if the...
hi all I have to try find a solution for a ls1 engine and 4l60 into a 4wd transfer case
the problem I have is the customer made his own transfer to 4l60 adapter so there is no provision for a...
hi all
im trying to turn off pats in a 2015 mustang 5lt coyote engine that's in another car
it only has one spot which is pats enabled or disabled
and it doesn't work
I read a post about having...
whoever has done it this way
do u have to put shifter from drive to neutral so it comes out of tip tronic
then back to drive so u can drive car
this is annoying when normal driving
this is why...
u really only need the module and not the metal part of it so they are not to big
but at moment fords are crap haha
think im about to give up on sniper, just had one car and shit support so its cost me afew days stuffing around
got to spend couple grand to get the software so i can do anything and i just cant...
not sure i dont use hps to go from auto to manual
i use the ford ids tool
same with holden ecus, sometimes its best to use the holden software to go from auto to manual
how r u changing the ecu from auto to manual
are u using the proper ford ids tool to write a complete correct manual tune in the ecu
then u need to check the ecu parameters and make sure the...
ive got little modules i use for tachos
i have used them for dong this type of stuff so there is no feedback thru to crank signal
they are hard to find these days
maybe try a gps module that...
i know the toyota ecs didnt care about it being 12v signal
i just neve get the chance to try things on the cars because most fo the time i send them out mail order
so this means i have to charge...
maybe someone could try the trick i used to do on the old toyota 20v 4ags
wire the speed signal input wire onto one of the injector pulse wires or even tacho rpm wire
i depends what u want to do
im sure hps cannot turn off the spd into ecu and im sure even if u can turn it off u still have to max out some settings if its a turbo to get full boost
if its non...
its 600 to 700 for dongle and i got one credit
and all i do is suck tune out and email to barry at batten tuning
otherwise its around 2600 bucks to buy the software and do it yourself but u still...
if its that important then sen your ecu to batten at perth
once u get it back then u can study what they have done and try to reverse engineer it
plus until hp tuners sorts the speed problem out...
sorry i do looms for a living and its costs me alot per tune twice as much as hp tuners credits
because i now just read the tune with sniper and send it to a ford tuner and pay him to sort it out
...
ive tried afew things with no luck
ill just have to charge double and use my other dongle compared to using hp tuners
ive got a couple of hp tunes with speed signal disabled but it would cost me...
hey Mick where is the sensor on the gearbox
i know there is no speed sensor on the box externally
also do the zf 6 speeds have an internal speed sensor which allows it to change gears properly...
depends how much money u want to spend
your better off paying someone to tune your engine because if u want to do it yourself with sct or sniper its a shitload to buy the software
hp tuners is...
yer i said stuff it and put the hp cable away
this ecu i have is a late bf s2 which is close to an fg and i cant adjust the speedo settings as good as you can on a ba
so i got my sniper cable and...
i think the easiest way is to wire up the matching abs module an just run one wheel speed sensor to the abs module
sniper software can turn off the speed signal with afew other settings awell
...
also u need a speed signal input if u r running any type of late model ford auto otherwise it wont change gears
its not like the gm 6l80 which has its own internal speed sensor
unless there is a...
ok ill try with some more settings
on my bf test ecu i got half way thru a write and it stopped with an error
had to change the one of the speed settings back and it worked
so there is one setting...
it can be done but u have to use sct or sniper
it just costs alot more per ecu
ive just loaded the latest hps 3.2 and it has a setting to change the vss source
it supposedly only work son ba and bf ecus
ive been testing for 3 hours this week and it doesnt bloody work
pain...