I've read that the 05 LLY's have issues with reading/writing, but I have a 04 LB7 and it isn't wanting to read the entire VCM. It gets to a point (usually 3x.xx%) and then tries to read the TCM. At...
Type: Posts; User: skimphish
I've read that the 05 LLY's have issues with reading/writing, but I have a 04 LB7 and it isn't wanting to read the entire VCM. It gets to a point (usually 3x.xx%) and then tries to read the TCM. At...
Hey guys, I've been searching around trying to find a good starter tune for my 04 LB7 (2004 Silverado 2500HD). I can't seem to find ones other than other newbs like me asking if they are ok... So...
Putting a M90 on top of my 97 3.8 (L26) Camaro and trying to figure out the MAP sensor. GTPs run with a 2 bar MAP, but the Camaro runs a 1 bar MAP. The connectors are the same, but the issue is the...
bump it
Long story short: my laptop died, had to get a new one, reinstalled HPT, got my configs working again for my WB through the EGR, everything was good. I was running version 2.1, decided to update to...
I did a scan on the car when I had first rebuilt the engine. Everything checked out fine, my LTFT's were good, no knock, etc. Well I just got back into tuning it after driving it for about a month...
I do have a WB, so I just use the AFR Error % table and use the special paste % to the maf table? So Just put the PE tables to where I want them, scan, copy/special paste? Thats the easiest way?
...
Im in the process of tuning my 97 Turbo V6 Camaro right now and am hoping to get some help. I have made a few threads already but figured it would be best to have one thread for all my questions.
...
The WB is brand spanking new, so I am guessing its accurate. lol.
Ill try cleaning the MAF, and I actually have a spare one laying around that I might try slapping in. Fuel pressure is right...
Ok, wtf is going on here? I went by Russ K's guide and went out and started doing some OL tuning. As soon as I put the car in OL via VCM controls the car runs like crap. As soon as I get on the...
alright, i looked through the PE tables and changed some stuff. the only thing i ran into was that in your tune the Add vs RPM table was on a scale from -32 to 32. On my table the scale only...
dammit, i read pretty much everything on tuning wrong. i completely misunderstood what the PE tables were and was getting them confused with the VE table. Im gonna go play w/ it some more.
alright, you will really have to excuse my my tuning newbness, but russ k's guide says to set the AFR to 11.5-11.75 all the way across the board, but i it does make sense to me that i would want...
Alright, I am having some difficulties with tuning my car. I am trying to get the AFR set at 11.5, but havent been able to. Can someone look at my tune and tell me what I need to change. I got my...
I do have 65lbs injectors, though (shoulda stated that earlier). I also have an AEM WB, which should have showed up when you played the scan. This was just a scan to start tuning, and all of these...
I have a turbocharged 97 Camaro and was trying to work on the MAF tuning. I followed the procedures from this website clicky.
When I went out and turned CLOSED LOOP to OFF the car started running...
Here is the scan from today. I think I had an exhaust leak, and may still have a minor leak somewhere because my WB keeps showing that Im going lean out of no where. And for some reason the WB isnt...
Here is the scan from when it was idling.
Yes, 65lbs injectors.
I got my car's turbo on, and its having some idling issues. The car will idle fine for about 20 seconds, then it will start surgine from ~1500rpm and drop down to ~800rpm. Also my wideband was...
alright, i actually just figured this out thanks to the help page.
now another question, someone told me that the ltft's are also reversed on early model v6's. is this true? and if so how do you...
I have a 1997 3.8 Camaro, and was looking through some of my logs. I noticed that I never have positive advance, its always negative. It will usually be like -21* to -37*. I thought that spark...
anyone?
oh, and here is my .cfg
i know that there are several threads about this, but i cant find the answer i need. i have a 1997 V6 (3800) Camaro. I have a LC1 WB that i have been trying to install, and its been frustrating the...