Search:

I have used the MVPI2 and VCM software in the past and would love HP Tuners support BMWs. Any new news?

Does HP Tuners ever intend to add BMW to its supported vehicles? I used HP Tuners for my Jeep and loved it. Sold my Jeep and now I?m into BMWs and would love to have HP Tuners to dial in the AFR and...

McCloud - thanks for the response. It is my first time tuning with any major modifications. This is a running/driving project, so I've been adding pieces/parts in stages and then updating my AFR...

No comments? OK. Let's try this, Attached is the .hpt file. 113737

What is a good closed-loop AFR to plan for with boost?

How much timing should I pull when running boost?

Thanks.
Tom

Folks -

First I want to say thanks to the HP Tuners community for the great information that is posted on this site. I have a supercharger project for my automatic 2008 Jeep JKU that I've been...

What was the final solution?

I?m having a similar issue with my Jeep JK. Full length headers and hi-flow cats

Very timely topic for my Jeep project. I?ve got a home brew supercharger that I?m adding to my 3.8L pos engine.

I?ve upgraded to a similar injectors as the OP. However, my approach to get things...

Just following up with this topic. I was able to load the Superchips tune file back into my Jeep and then use HPTuners to read the PCM. I?ve made a few small changes to account for larger injectors...

Wanted to give a shout out to the OP regarding this topic. I've got a 2008 Jeep Wrangler and the stock throttle response is garbage. I'm new to tuning, so I'm a bit conservative when changing...

I have a 2008 Jeep Wrangler and before I had HP tuners, I used a Superchips FlashPaq to load precanned tunes and change some settings in the Jeep like speedo calibration, DRL, disable TPMS, etc.
...

Folks -

I've been using the VCM scanner software for several days now and am starting to get comfortable setting up the scanning/logging of different parameters on my Jeep. I have attached a...

Folks -

I recently received my MPVI2 and have successfully downloaded the stock ECU configuration. I've also got the scanner software running and have captured a few test files. I've been...

Did you ever figure this out? I just purchased an MPVI2 and would like to adjust the throttle response as well. LMK.