Search:

Type: Posts; User: FstdodgeKY

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    117

    That was what i was thinking but haven't actually...

    That was what i was thinking but haven't actually had any experience with it. He is still working on his tune getting fueling dialed in and fuel trims, Tried to show him some histograms and what...
  2. Replies
    5
    Views
    117

    high IAT-bypass bad??

    Helping another member and we have a issue with high iat. He is seeing iat over 200* in stop and go traffic, drops down to 130ish when just driving and looking at a few logs seems like the temp sits...
  3. Thread: No Burnout

    by FstdodgeKY
    Replies
    2
    Views
    140

    No Burnout

    Got a small issue on my car not wanting to do a burnout, not sure how long its been like this cause i don't normally do burnouts but after a track rental a few weeks ago i noticed it. I looked over...
  4. Replies
    4
    Views
    202

    I believe i helped him out and wrote him some of...

    I believe i helped him out and wrote him some of the basic changes with the whipple tune i got from whipple when i did mine. It should have gotten him close but he was wanting to tune with ann off...
  5. I actually had Livernois unlock my PCM on a 2015...

    I actually had Livernois unlock my PCM on a 2015 Charger. I contacted them before and made sure it would work with HP tuners and they assured me it would. Haven't had any issues and going on about...
  6. Replies
    4
    Views
    219

    I know the tcm pulls alot of timing on each...

    I know the tcm pulls alot of timing on each shift, as far as where to change this i'm not sure if its on the pcm side of things or tcm? speeding up the shifts would help the feeling of the tq...
  7. Thread: driveshaft

    by FstdodgeKY
    Replies
    1
    Views
    144

    Poll: driveshaft

    Looking for recommendations for driveshaft. Real world experience, i've gone all over the web and have come up with a few just looking for opinions. Thing of going with a more traditional style...
  8. Replies
    7
    Views
    345

    By blocking off the bypass valve your getting...

    By blocking off the bypass valve your getting surging from the blower when letting off the accelerator and the air has to go somewhere.... You will eventually hurt something, blower, intake, or...
  9. Replies
    6
    Views
    186

    Could it be looking for a signal to start with...

    Could it be looking for a signal to start with manual enabled?? Like clutch pedal depressed?? Or neutral safety switch?? Possible bad pedal sensor..?? Have you done a throttle relearn?? If...
  10. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    I believe i have fixed the check engine light...

    I believe i have fixed the check engine light issue been a couple days now and hasn't returned

    Conan from what i've learned big cams need lots of airflow at low idle, You might try lowering...
  11. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    The car is tuned only on the VE table and o2 are...

    The car is tuned only on the VE table and o2 are off so i'm not getting any data from them. I do have a WB but sadly when ever the car starts the WB is warming up and not giving any data. All...
  12. Short answer to that is yes, you can force the...

    Short answer to that is yes, you can force the vehicle into closed loop but not just when starting, im not sure that would be the best way to go about it because when doing this there will be many...
  13. If your running a stock tune on stock motor i...

    If your running a stock tune on stock motor i wouldn't think it in the tune, I would log o2 and see how they are acting when you get this issue, that would be my first thought. When you start...
  14. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    I have noticed this with what I have already...

    I have noticed this with what I have already done. Hoping that going the other way will help in regards to having relying on adaptive to help control my issue. And speaking of my issue I'm really...
  15. Replies
    2
    Views
    270

    Whats RTT????

    Whats RTT????
  16. https://www.hptuners.com/pub/Pro_Link_v1.pdf ...

    https://www.hptuners.com/pub/Pro_Link_v1.pdf no it dosent need a switched 12v just a ground.
  17. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    Hemituna just spoke with travis over at...

    Hemituna just spoke with travis over at tbrtuning and that's what he suggested as well, i changed them to lower numbers thinking the TB would close more due to having a lower aircharge reading but...
  18. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    logged the idle commanded and it is exactly what...

    logged the idle commanded and it is exactly what the car is giving as far as rpm on cold start??? Humm still not sure, i did notice the car takes a while to throw the P0507 code, but never while...
  19. Thread: cam issues

    by FstdodgeKY
    Replies
    14
    Views
    448

    lean out the idle a lot and bring the fuel back...

    lean out the idle a lot and bring the fuel back in to give it the characteristics you want. also lowering timing in these areas will help, after that your can change the proportional tables.
  20. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    I try logging the commanded idle speed but if its...

    I try logging the commanded idle speed but if its commanded then why the code?? I have changed all the start up idle settings to match to cancel out variables.
  21. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    Yes it only when cold that i get the high idle...

    Yes it only when cold that i get the high idle and doesn't last for more than a few seconds, id say after about 30 seconds its idled down to normal. I've chased all over the tune a cant see anything...
  22. Thread: MBT talbe

    by FstdodgeKY
    Replies
    0
    Views
    112

    MBT talbe

    Looking for some insight on how this timing table is used. And how changes here effect the rest of the tune. Ive always though this table was used as a max timing table so you don't go above a...
  23. Thread: P0507

    by FstdodgeKY
    Replies
    21
    Views
    565

    P0507

    So i've been fighting this P0507 code. Its basically saying my idle is out of above the set point. This all began after i installed a hellcat TB 92mm.
    When i first install the TB the car never...
  24. TBRtuning will get you in the right direction,...

    TBRtuning will get you in the right direction, but to make adjustments to fueling you have to adjust the injector data pulse width vs airmass. Need to make a histogram logging these parameters...
  25. Replies
    4
    Views
    322

    Cant say for sure as i never tried it but i do...

    Cant say for sure as i never tried it but i do believe you can pull front driveshaft and pull abs fuses also, Not for sure tho, dont these have anti roll over sensors?? i know most have the clock...
Results 1 to 25 of 192
Page 1 of 8 1 2 3 4