Search:

Type: Posts; User: coachcrow56

Page 1 of 12 1 2 3 4

Search: Search took 0.00 seconds.

  1. Run MAF Open Loop Only, or MAF and Narrowbands??

    I have questions for all of the V6 tuners. My 2000 GTP does not use VE tables. It is strictly MAF. I have tuned the car using a MAF AFR ERROR histogram, using the method described by Russ K. I...
  2. Replies
    2
    Views
    86

    A lot of tuners change their AFR stoich to 14.4...

    A lot of tuners change their AFR stoich to 14.4 to try and compensate for Ethanol at 10%. But your factory narrowbands are ALWAYS trying to adjust (and maintain) your AFR to 14.7.

    If you are...
  3. Replies
    0
    Views
    128

    2000 Pontiac GTP Transmission

    2000 Pontiac Grand Prix GTP transmission for sale. Rebuilt with heavy duty parts--shifts like new---no leaks. Trans has 40,000 since rebuild by Rich Mize at Auto Super Center on Eastman Road in...
  4. Replies
    90
    Views
    40,291

    Sticky: That's it. I don't have the Pro feature set---I...

    That's it. I don't have the Pro feature set---I have Track Addict and Race Render
  5. Come on guys---there has to be one person out...

    Come on guys---there has to be one person out there who can confirm that I am either right or wrong-----one person----I know there are tuners out there that log boost----come on!!
  6. Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  7. Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  8. Replies
    5
    Views
    198

    Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  9. Logging Boost---should it be negative????

    I made an attempt at logging Boost on my 2000 GTP, but I am getting negative readings driving around town and a positive reading of 7+ under hard acceleration. I am attaching a scan, and my scan...
  10. Replies
    90
    Views
    40,291

    Sticky: To say that I am disappointed in HPTuners would...

    To say that I am disappointed in HPTuners would be an understatement. I upgraded to MPVI2 over a year ago, and now I can't use my LC-1 wideband. And the solution offered by HPTuners is to...
  11. Replies
    15
    Views
    4,913

    I upgraded to MPVI2 over a year ago, and at that...

    I upgraded to MPVI2 over a year ago, and at that time my LC-1 wideband would work in my scanner. Since then my laptop died, got a new one, and downloaded the new 4.6.0 VCM SUITE. Now my LC-1...
  12. Replies
    5
    Views
    198

    I had 4.4.4, and I managed to get back as far as...

    I had 4.4.4, and I managed to get back as far as 4.0.6.0. I wish I could go back to 2.0 or 2.4. My wideband worked with those versions.
  13. Replies
    5
    Views
    198

    TUNER SUITE 3.0 still available???

    Is there anyway to download a VCM Suite from years ago? My wideband would work with 3.0 when it was introduced. Now with the new version 4.4.4, I cannot get my LC-1 WB to work. I have...
  14. Yes, my EGR is deleted, but I am getting the 5...

    Yes, my EGR is deleted, but I am getting the 5 volts I need for the WB from the EGR connection. I have EGR volts set up in my Channels. That is how I set up my WB in the older versions of VCM...
  15. Frustrated with New 4.4.4---wideband will not work

    Over a year ago I upgraded to MPVI2----and downloaded the software---I think it was 3.0. Wideband and everything worked fine. Two months ago my laptop died. I got a new laptop and downloaded...
  16. LC-1 Wideband---help with set up in Scanner

    I need help. I cannot get my LC-1 wideband to work with my scanner, Version 4.4.4. I am scanning the EGR volts, Air Fuel Ratio Commanded, and I have watched every You Tube video on how to set up...
  17. Need Wideband---AFR Error Help--Please!!

    I have MPVI-2 and I am logging thru the EGR for my LC-1 wideband, but I cannot get it to work. I want to add AFR ERROR too, but I understand that will not work until my wideband is working...
  18. So how are you supposed to write a new tune to...

    So how are you supposed to write a new tune to the car if you are not connected?
  19. Replies
    12
    Views
    1,058

    I have tried two TPS sensors, one brand new that...

    I have tried two TPS sensors, one brand new that gives me reading of .37 V, and a modified TPS where I can adjust it to .43 V. And I ordered 2 brand new Idle Air Controllers from ZZP, and tried...
  20. Replies
    12
    Views
    1,058

    Thanks for looking at my tune. I am going to...

    Thanks for looking at my tune. I am going to try this today. I am going to go back to a 2005 GTP timing table that I used once before, and try the idle tables too. I will post the results later...
  21. Replies
    12
    Views
    1,058

    I cleaned and replaced it today----here is scan...

    I cleaned and replaced it today----here is scan that followed---its still surging----and my tune file
  22. Replies
    12
    Views
    1,058

    I cleaned it and the bore where it is...

    I cleaned it and the bore where it is installed---didn't make any difference.
  23. Replies
    1
    Views
    247

    Cold Start Up Idle Surge

    I am posting a scan of my cold start up and a tune file. When I start my car, the idle surges and will not settle to one speed. I need help. Can someone smarter than me take a close look at my...
  24. Replies
    12
    Views
    1,058

    The reason for my first post is that sometimes...

    The reason for my first post is that sometimes when I crank the car, I get a crazy high idle speed. But its not every time--weird.

    With the key on, engine off, these are the readings that...
  25. Replies
    12
    Views
    1,058

    Throttle Position Sensor settings?

    Can I use HPTuners scanner to adjust the settings for my Throttle Position Sensor??

    Long ago I modded my TPS by expanding the slots for the screws, so that you can slowly turn the TPS and adjust...
Results 1 to 25 of 290
Page 1 of 12 1 2 3 4