Search:

Type: Posts; User: Spoolnsquirrels

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    6
    Views
    150

    Hey DougO where in Washington are you located?...

    Hey DougO where in Washington are you located? I?m in Spokane
  2. Replies
    6
    Views
    150

    Well I can tell you I got it working , since it...

    Well I can tell you I got it working , since it is sensing the park paw ring I counted the number of lugs. Which is 21, I then entered that number in the speedo section under vss revolution, I then...
  3. Replies
    6
    Views
    150

    I did change from 4wd to 2wd so that is prob the...

    I did change from 4wd to 2wd so that is prob the issue. is there a way to way to make it work with only the 1 sensor? or do i have to pull the trans and have it re done with the right part?
  4. Replies
    6
    Views
    150

    4l80e swap but speed is way off

    I did a 4l80e swap and now the scanner and my speedo are showing like half of what i am actually going. but both the scanner and truck match. I also changed rear gear ratio from a 3.42 to 3.73 and i...
  5. Ok so now i have done segment swap is there...

    Ok so now i have done segment swap is there anything i need to change in the settings, to make it work with the Ckperformance D3 valve body? I only ask since with the D3 you have to disconnect the...
  6. I am running a 26" tall tire, aparently i didnt...

    I am running a 26" tall tire, aparently i didnt know i had to do a segment swap so i am doing my research on how to do it , but i am running into an issue finding a match to my OS
  7. 4l60e to a 4l80 w ckperformance D3 valve body

    Has anyone here done the swap with the ck performance D3 valve body? what am i missing? the issues I am having is the scanner is showing in the D1 position but the current gear shows 2nd. and my...
  8. Replies
    0
    Views
    128

    hp to ecm injector settings

    I was testing my injectors trying to troubleshoot a misfire and i found that when turning off an injector in the scanner wasn't matching the injector on the motor, for example if i turned #5 off the...
  9. Replies
    6
    Views
    449

    So i made many adjustments in both directions to...

    So i made many adjustments in both directions to braf and i have had no success with my issue. I still have a issue with startup getting really rich to a point that i have to flood clear with the...
  10. Replies
    6
    Views
    449

    one question? what is braf? is it base running...

    one question? what is braf? is it base running air flow?
  11. Replies
    6
    Views
    449

    ? Any help

    ? Any help
  12. Replies
    6
    Views
    449

    start up and dfco help

    The issue i am having is on start up and dfco, so on start up i have to give it almost full throttle to fire but when it does it only runs if i hold the throttle for a about 2-3 min till the engine...
  13. Replies
    7
    Views
    447

    I have checked my timing with a timing light and...

    I have checked my timing with a timing light and compared it to the lap top readings and they are dead on. I even set a fixed timing on the ecm in many different deg of timing and it all matches. I...
  14. Replies
    7
    Views
    447

    I think it is wierd too, but I have changed...

    I think it is wierd too, but I have changed computers , and started over from scratch with both the ecm and laptop, and it ends up the same, I have been able to tune it down on the VE and I am...
  15. Replies
    7
    Views
    447

    couple of tune questions

    so I have been busy working on my SD tune and have much progress with my understanding of how it all works with the serial Wb hook up and how to copy the scan to the main ve table in the editor, I...
  16. Replies
    5
    Views
    542

    so which of the innovative channels do I need to...

    so which of the innovative channels do I need to select in the scanner. status, Stoich afr , EQ ratio or AFR
  17. Replies
    5
    Views
    542

    connecting to the output pigtail, tried closing...

    connecting to the output pigtail, tried closing and reopening it , it pops up on the scanner but only reads 14.7 but doesnt change
  18. Replies
    5
    Views
    542

    Serial hookup of LC-2

    ok so I have my WB all hooked up but sometimes it wont show on the scanner when i hit rec and sometimes it does. when it does all it reads is 14.7, do I have a setting wrong? which serial channel do...
  19. HPtuners (standard) , LC-2WB question

    So I have HPTuners std, that I have built the channel in using the egr sensor input, and it works but the issue i am having is that at idle or cruse the guage and HPT match almost perfectly but as...
  20. Replies
    1
    Views
    157

    Fueling question

    I cant figure out why at cruse i am running so rich? I am only at 20% on the tps but i am showing 12.6 on the wideband , why am I running so rich? this all happens under 3200 rpm over that I am in...
  21. Replies
    2
    Views
    281

    Thanks again Luke, that did the trick

    Thanks again Luke, that did the trick
  22. Replies
    2
    Views
    281

    wont go into first?

    I cant figure out why my 4l60 wont go into first when I shift into first, it shows me in D1 or D on the scanner but wont start out in first from dead stop , always starts rolling in Second gear. it...
  23. make sure you have the your boost reference line...

    make sure you have the your boost reference line on the correct side of the wastegate, most wastegates have 2 ports and i have seen the over boost happen when the ref is on the wrong side of the...
  24. Replies
    7
    Views
    295

    2 things to try, try a sensor calibration, and...

    2 things to try, try a sensor calibration, and try setting you value from 9.735 to 10 and see how far of it is and then work down the voltage till it matches
  25. So since my motor is requiring so much fuel and...

    So since my motor is requiring so much fuel and air should i look into going with larger injectors? I only ask cause there a lot of people that tune with a comp ratio of 8:1 or higher, with mine...
Results 1 to 25 of 124
Page 1 of 5 1 2 3 4