Search:

This is where user defined parameters will help IF the tables are there in your OS.

I have seen in the past ford and Chevy will add parameters to new OS?s and even take them away because they...

We would need to know your OS before anyone would help.

Post your file that you have and we can help further.

It might have to be done in binary? HPtuners might not have the table defined.

BUT. Hard cuts normally cut the fuel injector at the specified RPM and then there is a resume function.

The cut...

That?s a super vague question man. Not being an asshole but there are ALOT of tables. It would be a book if someone wrote out what every table means/does.

In vcm editor there is a description if...

Asking for a friend? That?s just as good as ?offeoad only? lol

What I have seen is the LML XDF?s are spotty. It?s best to start with a Binary file from efilive and get it converted to a HPtuners...

For everyone having issues.. i have seen multiple people NOT put the red and white wire in the correct location on the ECM fuse.. Or using the wrong fuse all together. 2017-19 are a different fuse...

Is that you EPA? its been a long time!!

Gotta post a file for us to see what your talking about

i have a few LB7 tunes you can PM me and i will give you my email so you can email me your stock file

145045

Right here is where the spoofing happens.

What i would do is get rid of the spoofing and tune your FICM. you can really open it up with FICM tuning.

For a basic FICM tune take the...

As slimmons said you?ll need a lot.

Some of us already have this stuff but just to make an XDF for an L5P your looking at $2000 if your stupid lucky..

The L5P A2L is super hard to come by.

Haven?t looked at the tune but judging by the log picture I bet it?s icp spoofedz

Which means it ?tricks? the ecm into thinking it?s less pressure but in reality it?s running a higher pressure. ...

For your turbo, you would adjust EBP low and high altitudes.

You can adjust fueling to get it to spool faster/slower depending on what you want.

For your digital dash, edge cts3 has done a...

What?s the strategy?

I highly doubt you can find them anyways unless you knew the exact addresses.

And I?m sure MCC doesn?t show that. That would be a winols deal where you would have to manually find them and build...

Post your file so we can help.

But it sounds like you need to flash a file to it so the TCM knows what it?s supposed to do.

Unsure on this because I have only done a few L5P TCM?s

What do you need user defined parameters for?

That?s for HPtuners only. I think jetskier is saying use MCC program to adjust for the SOTF.

PM me and I?ll help you out. I have tuned a couple of them.

That?s all it says is just Failed?

No x code to the left of the status bar?

If I am not mistaken that is a non inferred strategy.

Easiest way to tell is hook your interface to the truck and open the scanner.

Connect to the vehicle by clicking the little car icon in...

144028

Yes your stock file.. have you done a read on the truck with HpTuners interface?

We can?t guess your strategy code on your ecm.

Post your file

You would think they would but as we all know in the diesel tuning world things are kept so tight knit that they probably won?t tell you.

Be easier to almost guess lol

Jeff is right though you...

No. HPtuners will only pull HPtuners files.

Contact me and I can help you with BIN files but the BIN is only the start of it. Probably the easiest and smallest part of this whole process.