I would start with whipple OS
They seem to drive nicer with some of the IMRC and cam stuff already done for youin the background
As mentioned earlier - if it was already running the whipple OS...
Type: Posts; User: rob_mac
I would start with whipple OS
They seem to drive nicer with some of the IMRC and cam stuff already done for youin the background
As mentioned earlier - if it was already running the whipple OS...
Yea we ahve read them
sometimes they need to be sent off to support to have file decoded - but have definitely custom tuned late model roush OS before
Hey team
Have a 2021 Mustang GT with Whipple OS and a dual pump dual reg Fore L2 system here and ID1300X2 / XDS injectors
Just wanting to confirm correct protocol for configuring these setups...
We?ve done one with no issues recently on whipple os
Thank you sensei !!!!
Hey guys
Have a quick one I'm sure someone here has come across before.
Have the KB twin BAP plug and play kit going into a trackhawk here - how ever was supplied to us with hellcat...
Hey guys
This one is beating me up - I keep getting a "traction control" torque source and throttle closure with this Edelbrock blown mustang, however we are definitively not breaking traction (or...
Did that - that?s what we have always done for all mustangs on dyno
But that didn?t stop the suspension fault speed limit
Hey guys
has anyone run up a 18 mustang with the magneride suspension on the dyno yet?
had one today and with either the abs service loop unplugged to disable tcs / esc, OR with letting the...
Hey guys
Does anybody have a ROUSH tune or something i could look at starting from for this model of vehicle
Turns out I was sent the "tuner kit" with no injectors and no ROUSH tune
Going...
Hi guys
Having some issues trying to get the torque tables dialled in on a whole bunch of ROUSH supercharged mustangs we have been doing here lately.
I feel like I know what the problem is -...
so when doing the stoich trick, your saying that we also need to halve the offset, short pulse adders and limits,and min inj pulse ?
im also having problems on scaled injectors on cold start but...
i have only done this for testing to ensure she kicks and rise to stay alive as long as possible - because as soon as you apply any throttle, the injections time goes through the roof and kills the...
Hi guys
Having a massive problem here with an engine setup using ID850 injectors on an early model e38 pcm and getting around the 63lb injector coded limit
Have tried tuning the car numerous...
sorted - found to be 3.3 bar sensor
found right linear and offset values (333.33 kpa and 33.33 offset) and all good
can upload quick log at idle etc if it will help?
tune values are for map sensor linear / offset are 305kpa / 10.33
hey guys
i know this seems to be a fairly common problem, but have seemingly tried the solutions i have read about but wont seem to fix it
have applied a 3 bar os and running a 3 bar map -...
bowtietommy - if it makes you feel any better this has just happened to me on a car also
the engine rpm pid IS NOT in the list - im trying a new software download and will see if i have any luck...
following changes made:
changed the adaptive idle over / under settings back to factory
changed base spark timing to 15
low load rpm point in HO spark table back to factory
and problem of it...
tried to bump the airflow figures up a bit in first and reverse to help with sometimes wanting to drop / stall on light clutch riding etc etc (aka reverse park maneuver etc)
is there another table...
2 bar mafless os applied
hey guys
have a few strange issues on this one, and was hoping could get a few tips
1. im guessing this has something to do with adaptive idle routines as it happens as i drop below the max VSS...
think i may have it sorted
smoke leak machine showed a few various vac leaks around the place
have repaired a few and already the map readings are falling more in line
gotta finish the rest...
software version is 2.23.343 beta
hey guys
weird one here im hoping someone could see an answer too
have a gen III vx ss ls1 here that has delphi 2 bar map sensor + mafless tune in her
we have tuned this thing plenty of...