Search:

Yes I did use a new timing set & figured it it out after I looked at a few pictures I took of the assembly! Then I asked a few people locally they told me the half moon cam gear is for a 05 (wrong...

I have a c6 built 402 supercharged I went to start for the first time got a code (0341) didn't think twice proceeded to crank but no start? I heard some back firing wondering if the cam is time...

I've got a 06 c6! Where can I get a 2 bar map sensor? Where is a good location for the IAT?

Thanks for your help!

I'm getting started in a day or so on tuning my boosted 402:D I'm new to the hp but have basic knowledge of tuning! I have 70 lbs. injectors upgraded fuel system etc. Do I need a different MAP & MAF...

I've tried a few gm vehicles the mpvi is not giving me a green light. The only green light I get is when the usb port is plugged in to the mpvi.

I purchased the professional package about a month ago cannot get it to work on my car :mad:
My drivers are installed correct, there's power in the obd port but, the mpvi will not light up. A friend...

I connected the laptop to usb cable & mpvi powers up. After doing all that I went connected to the obd port and scanned......error message reads "The interface was found but no power from the...

I installed the interface but I'm not getting any lights on it. When my scan tool is installed everything works fine. Do I have a wrong cable or a interface thats my question?

Thanks

All the fuse check out fine :banghead: I have a scan tool that works what can be the problem? Is my obd2 connector wrong?

thanks for your help!

I checked the fuses, but both of my cig lighters work. Is there a other place I can check?

Thanks for your help!

Hello everyone! I'm having bit of a trouble getting power out of my obd2 connector can someone direct me to what fuse it may be. I have a 06 Corvette and checked every fuse.