Search:

thanks had someone check it out and they are working on it, no more backfire or popping now.

can anyone explain how to log base running airflow or raf in the scanner for the 2011 camaro, i used it to load my 1968 camaro swapped ls to dail in the base running airflow. however i can't find the...

hey guys i installed my nightfury cam this weekend and been messing with the tune, it wouldn't start without keeping my foot on the gas so i changed a few things and now the car cranks and idles well...

ok i did as you suggested by turning off the dfco, and to my surprise steady average ltfts 3 to 6 from 15 down to 25 from .4 to 6.4 thanks now that i see it isnt that bad i will enable dfco thanks...

i have a question, i have my ltfts on average set at 0 to -3 on the histogram display from 40 down to 105 and from .4 to 6.8, but my question is that in the histogram display 15 down to 35 and from...

anyone

ok after doing some logging today i finally got the lifts from -4 to plus 4 all over the graph. ;D going from a 3 bar 37.1lb injector rated at 43.5 psi and scaling it to the ls1 58 psi was harder...

well i put 42lb injectors in my car tonight and scaled the ifr table accordingly, and after the install all of my ltft went to 25 every cell, does this mean i am running lean or rich, and should i...

ok this is what i found out about the accel 36lb injectors, thier flow rating @ 3.0 bar or 43.5 psi is 37.1 , i am still confused how to get thier rating for the ls1. i'm not sure how you are...

memphis tennessee here :cheers:

im not sure what pressure they are rated at , i bought them for the tuned port motor, which i believe is set at around 43 psi, if that is the case what should i do? :huh2:

thanks chris and by the way i do have the 28lb currently. thanks again

hey all, new to hp tuners how would i go about putting a tune in my 98 ramair using 36lb accel injectors with hp tuners. car has a base tune for my setup but i just want to add the larger fuel...