The 6.2 has MEFI 5c
Type: Posts; User: rassetr
The 6.2 has MEFI 5c
So this also keeps the pcm locked even if it has been reflasched with a tech2?
Shouldent that errase all info in the pcm and leave it in "standard" state?
I have allready tried the downshift speed at 100 km, the dyno pull starts above that.
How would I see if it is in the abuse mode?
I was able to change all parameters today with the beta version. :drivin:
The problems was not the resolution as it was possible to change many other parameters wich had as many decimals.
On the...
Running a C5 on the dyno and commanded it to 4 gear but it still shifts down to third when you put your foot down.
I have tried easing it down or flooring it strait but it all ways shifts down.
...
Yes, I got beta and now I could open the file.
Atleast in this file I'm now abel to save any numbers in theese problem areas I had with the normal software.
I hope it's the same on monday when I...
Bill when tryin to open your file , it gives "Index was outside boundaries" ?
It will not open it :(
What is causing this?
That was what I also tought, so I tried english and swedish also next to finnish but all does the same?
It started after the Tech2 reprogram so thats why I wonder what it is thats causing it?
...
You can try and get the finaldrive gearing to 3.90 as an example. I can't.
On this car they have changed it and when trying to input that it will not store anything else than 0. That's why this is...
:) I was tinking the same first, but have tried it all day now.
It acepted for some reason numbers above 1 but not below?
starting number was below :(
It does it on the finaldrive gear ratio...
Here is the file.
It is not a ready file in any means, I have only started setting in up but then run into this problem of not being able to cange parameters.
Car is a -00 Vette with AFR heads...
I will do that in the morning when at the office.
To recreate it I dont know what to say.
I had the car put to standard with Tech2 and read and licenced that. Saved and then opened it up and...
Im having some trouble with some parameters that dosent let me change them. As an example I can use the Fan 1 and Fan 2 on a 2000 Corvette.
Fan 1 had 0.005 in the parameter box and I wanted to...