Search:

Type: Posts; User: HaasExp

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    1,396

    Adding another bump with the exact same question:...

    Adding another bump with the exact same question: What is this parameter actually used for?

    According to the HP tuners info bar it's the "Factor to convert from Mass to Injector PW during startup...
  2. Here's the Sprintex "canned" tune that came with...

    Here's the Sprintex "canned" tune that came with mine.

    97857
  3. Thanks for the info Juuso124! I'll browse through...

    Thanks for the info Juuso124! I'll browse through that forum and check out the EGS52 thread. You might be correct about his bizarre calculated pedal value, however when I effectively eliminate this...
  4. Every time after a TCM reflash I use the scanner...

    Every time after a TCM reflash I use the scanner and do a trans initialize and reset the trans adaptives. Don't know if its required but this is the same procedure I've followed every time.

    Torque...
  5. This is rather interesting Juuso124. I wonder if...

    This is rather interesting Juuso124. I wonder if the OS's are the same as in these FCA vehicles? Do you have a read from a Mercedes with a egs52 that I could have a look at?

    To try and figure...
  6. Still at a loss with this issue. I started...

    Still at a loss with this issue.

    I started making large changes to the Term Coefficients and Decay Divisors under the Shift General tab in an attempt to control and minimize this...
  7. Time for another update. Heard back from HP...

    Time for another update.
    Heard back from HP tuners support and they added a set of shift tables matching the values of what I saw in bluegoat06's screen shot to 4.5.1417 Beta.
    Long story short,...
  8. Appreciate the input to this rather fustrating...

    Appreciate the input to this rather fustrating issue guys!



    I believe I've just experienced this first hand. Only just downloaded the BETA software on Friday which gave the same breakpoints and...
  9. So I managed to open up bluegoat06's tune in...

    So I managed to open up bluegoat06's tune in question with and earlier version of VCM Editor (VCM Editor 3.0.8).:yay:
    When I do this I can replicate all the pedal % breakpoints in his original...
  10. Still persisting with this issue. I've been in...

    Still persisting with this issue. I've been in communication with HP tuners about it but so far nothing constructive to report.

    While browsing through numerous threads on here I did come across an...
  11. Replies
    0
    Views
    116

    Initial Accelerator Pedal Dead Spot

    Hi all,

    Chasing some guidance as to how I can tune out the dead spot I'm encountering under initial accelerator pedal movement on a supercharged 3.6 wrangler. This dead spot only occurs under the...
  12. Thread: Ve tuning

    by HaasExp
    Replies
    26
    Views
    1,405

    Hemituna just to clarify: The fueling strategy in...

    [/QUOTE]

    Hemituna just to clarify: The fueling strategy in these ECU's command stoich (Eq of 1) only until an FA enrichment is commanded from the PE table?
  13. Hi Mag0842, thanks for chiming in. I guess...

    Hi Mag0842, thanks for chiming in.

    I guess what I'm trying to figure out here is how to actually command the shift as requested in the PT schedule tables under light throttle conditions (convertor...
  14. Cheers for the tips teamrm. I must say I have...

    Cheers for the tips teamrm. I must say I have tried the throttle relearn procedure a few times (in an attempt to remove to initial dead pedal feel on these) but I can say that hasn't done anything in...
  15. Hi Tadias48, Glad to hear I'm not alone. There...

    Hi Tadias48,

    Glad to hear I'm not alone. There are also a few other threads on this forum of others having issues with the NAG1 part throttle shift tuning on their Jeep Wranglers. While most...
  16. Replies
    2
    Views
    1,134

    @raceplayhavefun did you ever make any headway...

    @raceplayhavefun did you ever make any headway with this issue?

    Incidentally I have stumbled across the exact same issue on the exact same vehicle......
  17. Scrap the idea of the trans shifting at the...

    Scrap the idea of the trans shifting at the desired Accel Pedal/OSS when the upshift/downshift offset speed is 0.
    Shown in the following log is a 1-2 & a 2-3 shift where the OSS = 0rpm.
    96374
    ...
  18. Replies
    0
    Views
    188

    NAG1 Upshift/Downshift Speed Offset

    Anyone know how these PIDs are calculated and how to manipulate them? I would like to set them to 0rpm, thus eliminating any influence from them. Can this be done?
    I believe they are affecting the...
  19. So I think I may have made a bit of progress...

    So I think I may have made a bit of progress trying to figure out this PT shifting behaviour.
    I've disabled the "Performance Driving Factor" switch and have mimicked the values from the Normal PT...
  20. Thanks for the replies so far guys. The only...

    Thanks for the replies so far guys.

    The only PID that comes close to a shift ID is the "Trans Shift Mode" which always has the value of "4WD" in the case of the Jeep wrangler. The only reference...
  21. I done a few more datalogs and have attached some...

    I done a few more datalogs and have attached some screen captures. Again it seems something is not right with these PT shift schedule tables as the shifts are commanded at a much higher (logged)...
  22. NAG1/A580 Part Throttle Shift Scheduling Table Tuning Questions

    Hi all,

    I have a Sprintex supercharged 2013 Jeep Wrangler with the NAG1 trans in which I'm wanting to tune the part throttle shifting on.
    From the PT tables the shifts are scheduled by the...
Results 1 to 22 of 22