Hey everyone, just started into the world of tuning Fords on my buddies car. We put in longtubes and a cai kit and i would appreciate help with tuning for both. Anyone have a scanner histogram they...
Type: Posts; User: capss9c1
Hey everyone, just started into the world of tuning Fords on my buddies car. We put in longtubes and a cai kit and i would appreciate help with tuning for both. Anyone have a scanner histogram they...
Thank you, i know using the compare file didnt fix my issues. Just trying to dial in my tune for a while and cant seem to get anyone local to me to figure things out. I figure since the 01 express...
Hello all, was wondering how to swap my operating system from an 02 Z28 to a 01 express van? I have an 0411 pcm. I want to try the express van one with my lt1 24x conversion. Thank you much
Ive been dealing with a cold start fueling issue, by lowering the adder table and the olfa table in the cold temp areas seems to help with my cold start problems. It takes a little longer to crank...
I tried to do the Russ K idle config several times but keep having issues, after logging the with the config, ill change my tune to the info that was logged, all seems ok. Restart after the engine is...
Still new to all this tuning stuff, im making a graph for iac step tuning and one of the pids i need is dynamic airflow, but it shows its for a maf sensor, what do i use for a pid for speed density?...
what kind of a/c compressor is it? aftermarket Sanden style or original to LS style engines. LS style engine have a flapper setup to compress and the sanden is a piston style witch take much less...
Its a 2002 Camaro ls1 A4 and im looking to adjust the tune for the longtubes. O2 sensors are not switching correctly at idle. Looks like the o2 sensors moving farther away from the cylinders caused...
Thanks everyone. My os does have the max pressure disable and it is disabled.
Hello all. I have a 2002 camaro Z/28 A4 that im switching to speed density, anything special that i have to change in the tranny tables for this? I thank you for your input.
I should have learned from the last time....I updated without saving my math's without reading this post first. took me a long time to figure out the math for my OS now I have to look to see who...
I did notice that once i lowered the maf to 400 rpms when i tuned, the trims did fall into place without changing anything else. Also i noticed if i start the car a few times when its at operating...
that's what I was thinking. I've been searching around for the correct data. I guess nobody wants to give up that info......thanks...
Hello all, its a 2002 camaro ls1 a4 operating system, I did a ve and maf tune on a 60-65 degree day and sunny and all the ve and maf errors were +1 /-1 all the way around. The next day i drove the...
I have an open ticket with support to fix the serial issue with the aem 30-0300.
Im using a 0411 pcm from a 2002 s10 myself and had to flash the original operating system in for a 2002 camaro ls1. Thats the best way to do it. But it needs to be done with GM Tech2.
Installed my new AEM 30-0300 wideband, connected the serial to usb adapter to the laptop, set up the channel and whe wideband reads 0.98 and the channel reads 9.8. any differences in the wideband...
nobody has experience with these?
I have come to the conclusion the all Innovate stuff is crap..... been on the phone with them a lot this last week trying to figure out why the voltage offsets change constantly while logging and the...
Hello all. Ive been trying to get the correct injector data for my tune, they are the bosch green giants # 0280155968 42lb, i know the LS1 runs 58lb fuel pressure and i am running a vacuum referenced...
The commanded lambda is showing the eq ratio. The wideband shows lambda under 1.00 and the scanner shows the true equivilancy ratio. Still new to all this. Trying to learn the new scanner.
Im using a 2002 f body A4 calibration, MTX-L wideband and scanner version 3.0, latest download yesterday, i made a layout using the scanner v3.0 how to's and when i datalog ve lambda error, my...
So i purchased Hp tuners because of the RTT that i used 2 credits for on my 2002 Fbody pcm, been using it since to tune my 24x conversion, upgraded to 3.0 not knowing it would completly overwrite my...
Anyone have anything else to add? Anymore tips or tricks for tuning the 24x conversion. I read a lot of people are doing the conversion but not finding out who has been doing the tuning. How...
2002 F body A4 calibration, im running a cam with 14* cam overlap and i did raise the normal and make up tables 20% and made a big difference, i have the raw fuel smell at cold start up, would think...