I’ve found areas in my truck OS that uses trans fluid temp as the oil temp reading. Not sure if it’s this same situation for the zero pedal tq though.
Type: Posts; User: jasonz28camaro
I’ve found areas in my truck OS that uses trans fluid temp as the oil temp reading. Not sure if it’s this same situation for the zero pedal tq though.
Check out this video if it’s a swap. Go to 6:44 and check this out on your harness. Different pin outs for different years. Might not be your issue but worth looking into. He’s got lots of good...
I do appreciate the help. Thank you.
Now on to my next issue. One of those mysterious timing pulls at WOT in 6 and 7th gear only. It’s in the log above, same tune too. Need to probably start a...
I did the change you suggested at idle only and it got right around 73psi. I did not do a WOT pull on it though. I put it back to stock and altered table 18102 (min voltage) to reflect a ZL1 and my...
I did not know it was a thing to tune the module itself, I figured there was enough fuel-related stuff on the ECM side of things. I did some searches and came back with certain OS do not allow you to...
Physically its present but I guess not able to read with this OS.
I'll up that to 500 kpa and see what it does, give me about an hour.
Is there a special way to do it? All I see is the engine and trans when I go to read.
Yes
Hi,
I've noticed my low side fuel pressures being in the low 40s at WOT with my setup. I've got mild boltons with e85 on my 68 camaro with a 2018 truck OS. I'm maybe around 450whp ish and I do not...
The sensor wire was unpinned at the ECM connector. No voltage was at the sensor so it was traced back to the ECM and it was not pinned in all the way. Common from factory from time to time with any...
I went with the trial and error route that you suggested. I started over form scratch and I read more on this and came across a post saying to uncheck the box that links the TQ tables and tackle if...
Thanks for taking the time with this. I?m out of town for work for the next month but I?ll jump right back on this when I get back and let you know how it goes.
Thanks for the detailed description. This is more or less what I had thought you did, I tried to mimic it and my numbers did not come out exactly like yours, I think I took out 5-10% in the same...
Here's the current tune with the tq changes TriPinTaZ made and the TB max area set to 5136. I've also included an idle log, cold start to around 17X degrees.
108005
108006
Thanks for the reply. I get how the torque works, I?ve just never adjusted it and was curious to see how exactly you did it.
I?ll try to get some logs up and have y?all check them out soon.
So I still cant tell exactly what you did. When you compare it shows you changed the coefficient tables but is that just showing the changes to the VTT trickled down to the coefficients? I guess I'm...
Cool, I see it now. Did you subtract in the area by a percentage or take an actual torque number out? I see you only did the e85, is it good practice to do pump gas areas in the VVT too now or wait...
https://forum.hptuners.com/showthread.php?90442-LT5-TB-upgrade-tuning-issues
Check out my tune file here. Go to trans diagnostics and look at the DTCs that we?re turned off. This should get you...
Thanks for checking it out. It did seem to help, I'm at 3-5 degrees now. What did you change?
I got a recommendation from a facebook group that said to start over and just use my stock VVE table...
I added a LT5 TB and I'm getting negative timing at idle. I did a search and some say to get the MAF and MAP side of things in order first before attempting anything else and I ran into another...
107706
Heres the file you needed if you havent got it yet.
I like that reply. Reminds me of a Dr. Seuss book lol.
I got a 10 speed, I love it, also love the 8 speeds, not so much feeling the 6speed autos though.
So I?m familiar with keeping the...
I’m interested if anyone has done it on a truck too? I have a swap car with 2018 Tahoe OS with a 10 speed. At the moment I cannot even shift at high rpms while doing tapshift, I may be able to adjust...
Have you searched camaro6 before? It?s not a truck OS so I?m not sure how much applies to your application.
https://www.camaro6.com/forums/showthread.php?p=10640039
What fan/s are you using?