Issue fixed! Simple really. Sent in info log, datalog, channel, was instructed to download the newest beta and repoll pids. Those few things got it back online!
Thankful.
Type: Posts; User: i tried
Issue fixed! Simple really. Sent in info log, datalog, channel, was instructed to download the newest beta and repoll pids. Those few things got it back online!
Thankful.
Thanks for the reply however the wire loom is fine and im using a mpvi1.
Hello Fellas. Looking for some help.
Working on a 2020 camaro ss.
We installed a lt4 supercharger, lt4 high pressure fuel pump, long tubes and borla exhaust.
Since doing so somehow weve lost comm...
Hello everyone!
I am looking for some good direction on this torque control computer deal.
This is a 2018 gmc 5.3 with a small cam, whipple, long tubes, lt4 pump and injectors, zr1 big throttle...
nevermind. it wasnt the throttle it was the inlet boot to the supercharger collapsing cutting of all airflow
Hi fellas
Here we are working on a 2014 lt1 with a f1c procharger
were running a f.o.r.e. triple pump kit and a holley hp for 2nd set of squirters...
however we are not able to get past 5300rpm....
That worked. Got it dialed in and running great. Thanks!!
Hello,
So working with a 2016 hellcat. has long tubes, upper pulley, 1300 id squirters, boost a pump, e85, 5in cold air,
So problem im seeing is something is pulling timing during a pull. Its...
So i may have found the culprit. So i believe the knock sensors are just wayyy to sensitive started desensitizing them and things started to fall into place. desensitized them enough to where it...
i have a 2016 cat doing the same thing pulls timing through a pull. anyone have any direction on this.
Driver demand was my first go to...didnt seem to affect it much.
So were working with a c7 z06. A8 Transmission. One thing we noticed is lets say you accel hard and release the pedal..there is a delay from when letting off the pedal and the engine starting to...
I only copied the airflow and throttle tables. But i wonder if everything would match up since our injector and ve tables are different.
So here is an update. Made some tune changes and it seems...
Ok so i have tried moving all of these values and the only thing that seems to change is the rate the throttle opens the surging is not going away at all. Refueling the car and will continue running...
Thanks for the information. So i took this morning and tried moving some values around and nothing seems to be making this car happy. So yes if youre willing to post up a working file that i can...
So we have a 2015 scat pack with just under 5psi. During mid throttle acceleration it is ocilllating the throttle blade and we can not figure out why. Attached is the calibration and a log file...
the tune is posted above. on the dyno it makes it to 5700. this datalog is on the street. floor it in second and that is the highest rpm it gets to and goes into limp mode. have to stop the car...
64480
Tried all of the suggestions and still no luck. Any more ideas here is a log
im having same problem hopfully someone can charm in on this!
So working on a 2007 magnum xl 6.1 with a vortech. I can not get this thing to rev past 5700rpm. Anyone have any ideas? Running 4th gear on chassis dyno. If i make a sweep in 5th gear it will surpass...
Hey guys
working on a 2015 hellcat. Has upper pulley change, bigger injectors, e85, 5in cold air, and tuning. Problem im having is i hit 150-160mph and thats it wont let it go anymore. Im not sure...
i have tried setting it to 150 and it still does the same thing!
Ok Got some weirdness going on. If i am in m2 go to wot, shift into third via paddle shift the car will then automatic pretty much go right into 4th. Cant figure out why. Any thoughts?
Well got it fixed up. So yes it has 2 temp sensors and i was only looking at the one in the maf and not the one in the manifold. The Intercooler system had a leak and lost all the coolant which...
Hey guys looking for some help here.
Have a 2013 ctsv 2 door.
Installed a pulley, long tube headers, no cats, corsa muffler. Typical stuff
Ok so car is on chassis dyno and fueling is pretty much...