Search:

Type: Posts; User: MAIDENCR

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    24
    Views
    805

    fot me pilot timing I start a 18 on both...

    fot me pilot timing I start a 18 on both axis(0mm3 to max mm3/0rpm to max rpm) then going to 0 at opposite corner (max mm3/max rpm) no pop
  2. Replies
    20
    Views
    503

    im my tune played with timing and made a huge...

    im my tune played with timing and made a huge differences.....jim and dom correct me if im wrong but his max timing seam low for the duration and rpm ?
  3. Replies
    28
    Views
    623

    Probably...i know that with stock tune if you...

    Probably...i know that with stock tune if you disconnect fan clutch sometime rpm hang up....probably its shorted inside or wire have been cut and they short together
  4. Replies
    28
    Views
    623

    The other time i bapassed all correction in my...

    The other time i bapassed all correction in my tune and pressure was 3500psi at idle..
  5. Replies
    28
    Views
    623

    You dit some change in corrections table of rail...

    You dit some change in corrections table of rail pressure??
  6. Replies
    28
    Views
    623

    Its a early 04? 305hp or a 04.5 325hp?

    Its a early 04? 305hp or a 04.5 325hp?
  7. Replies
    28
    Views
    623

    you can send your channel list please

    you can send your channel list please
  8. Replies
    5
    Views
    299

    Mine is a 6speed so tps is under the battery

    Mine is a 6speed so tps is under the battery
  9. Replies
    33
    Views
    2,057

    my tune work perfectly now....plenty of power and...

    my tune work perfectly now....plenty of power and no issue with controlling both cp3 with ecm….
  10. Replies
    5
    Views
    299

    Its in the dc to current table to make dual cp3...

    Its in the dc to current table to make dual cp3 work
    I have hamilton spring and pushrod
    I really wanted a clean tune
  11. Replies
    5
    Views
    299

    90959 here is the log

    90959

    here is the log
  12. Replies
    5
    Views
    299

    Result of my tune

    Here is the dyno with my truck and my own tune
    Made 705/1000 with 25800pis/2600us
    100hp nozzle
    Dual cp3 with Y harness( for the guys who said it dont work on 03-04 ...look it work 😁)
    S427sxe
    ...
  13. bag of parts is a "joke"....if you need more fuel...

    bag of parts is a "joke"....if you need more fuel you need a bigger cp3 or dual cp3
  14. The 3nm more dont worth it ahaha Will see june...

    The 3nm more dont worth it ahaha
    Will see june 20...i should go on dyno
  15. To really know if you are close timing wise we...

    To really know if you are close timing wise we need a dyno??
  16. Replies
    18
    Views
    505

    Mostly stock....want to keep the cold driveability

    Mostly stock....want to keep the cold driveability
  17. Replies
    18
    Views
    505

    ya the damn cold temps.....it always play with...

    ya the damn cold temps.....it always play with coef/adder table...
  18. Replies
    24
    Views
    534

    Ah..ya forgot that...because i did some math in...

    Ah..ya forgot that...because i did some math in my scanner to remove barometric pressure from it si i read manifold boost pressure
  19. Replies
    24
    Views
    534

    Ok eheheh i still have a lot more to learn i...

    Ok eheheh i still have a lot more to learn i think ahahah
  20. Replies
    24
    Views
    534

    Ok ok but its kinda weird since turbo is at 36psi

    Ok ok but its kinda weird since turbo is at 36psi
  21. this is what I will do soon...hope I will have...

    this is what I will do soon...hope I will have great result
    since engine is quieter at idle with timing atdc….at cruising speed you think it should be less btdc like at idle....like 40/60 or...
  22. Replies
    24
    Views
    534

    0 deg of timing at "full" load ?? weird?89685

    0 deg of timing at "full" load ?? weird?89685
  23. How we can know when the combustion is...

    How we can know when the combustion is happening?? If the 50/50 rule isnt good
  24. Tuning is a mix of timing, rail pressure and...

    Tuning is a mix of timing, rail pressure and duration

    My tune timing is mostly 60btdc/40atdc and since i do some sled pull and spin engin to 4k rpm i also limit my main injection to 23deg atdc...
  25. Negative number is ATDC....positive is BTDC...

    Negative number is ATDC....positive is BTDC
    Pilot timing(pre) is degre before main injection
    And post injection you simply remove it...
Results 1 to 25 of 70
Page 1 of 3 1 2 3