ok i made the change i also lowered my shift tables with Bluecats trans table, to 5900, waiting on my hardened pusrods and trunnion upgrades, they should be here in a few hours.
then back to tuning.
Type: Posts; User: Throttle
ok i made the change i also lowered my shift tables with Bluecats trans table, to 5900, waiting on my hardened pusrods and trunnion upgrades, they should be here in a few hours.
then back to tuning.
backs off the throttle and cuts spark,its torque managment but i dont know what to do about it
it didnt help still hitting that imaginary wall at 6000 RPM, it closes the throttle so I know its torque management but what?
i should mention its a 6.0 with the SS2 cam and springs, headers,CAI
i raised it up to 7200 after 15 seconds
this truck will not rev past 6000rpm for nothing, help
never had a problem with this https://www.summitracing.com/parts/nal-12592525/overview/
so how do I get a tps filter on my AFR error
so here is my scanner layout, I know for a fact those settings for the wideband are correct, I dug my old laptop out and those settings were in it for the fast WB and I then went and tried it in my...
I will bring this back up since they have changed our scanner and put no predefined FAST wideband setup in this new style, really ticked off cause I cannot figure this out and my new turbo setup is...
right now i just turn the air pump on thru the VCM controls, at some point i will pull the fuse box look for the trigger wire and move it to a temp or manually triggered source,just thought since it...
can we get something added to the custom OS so we can use that existing Air Pump relay to be used for Extra Fans,Intercooler pump,Extra fuel pump,Etc,oil cooler Fan, so its either ECT,RPM,or IAT...
Is there any way to take control of the existing air pump wiring and Relay that exists on my 2000 firebird,so that i can use it to control my oil cooler fan?
it was the damn burst knock
well i had beta for a 2013 dodge ram i tuned so now i am stuck with it for a bit
I am new to tuning a Forced induction motor but not NA but this thing is getting to me,Please help me get this thing somewhat close,BTW i am saving for new Injectors,as you can see when it starts...
i am having this problem also on my 2000 firebird ,using 2.24 scanner and editing with the beta it will crash when I copy then paste special.
Siemans 60# for now till I get some money saved up
would not let me download the tune at first,Sorry
i will be getting my car running this week and was wondering if anything stands out for my my starting baseline,I was pretty good at the NA side of tuning but this turbo is all new to me.
did you say it has no exhaust on it,just long tubes meaning it has open headers?
its fixed works in custom OS now,with the ZR! 3bar MAP
what MAP?
i had problems with the idle and that was it but there are some tables i didnt dare change without valid info so i bought greentops,That was four injector sets ago!
well how come i have 2.24.584 and it still doesnt let me do anything other than stock???
i have held off on ordering a Map sensor because they said maybe!,But when the machine shop is done balancing and boring my block somethings gotta happen.