Search:

bump

bump

Trying to use EIO output to trigger N20 Noid but it doesnt have the icon to save the PID that you just created. Im using the latest beta and doesnt seem to be there. Is there away to fix this?

Edited:

nevermind found out on myself

im working on a 2.2 cavalier and it has a built motor and custom turbo kit. Im tryin to configure my historgrams and not having any luck finding examples. Im familar with the LS motors so all my...

thank you very much. that helped alot. i loaded a few previous logs and all showed right kpa. thanks alot!!!!!!!!!!

ok ok now were getting somewhere. Bill that chart looks alot better then how mine. if that is the actual scan that isnt so bad [besides lean] so tune is sorta in the park....now you said my PID is...

here is what im referring to. if you look at the table it shows 196kpa but if you look at the historgram you see that its only 95kpa.....now hsouldnt they both match?

this is my scanner configuration

dewey, on my boost gauge ive read 15psi, and my wastegate opend up and the highest the scanner recorded was around 170kpa

5psi is my bov and i can hit that and...

this is my latest log its only around the block. if you notice the histrogram doesnt match the others. also is a copy of my latest tune. if you see anything please point it out. sooner i figure...

but in the log the truck doesnt seem to be going in the higher tables. honestly i just want to try and get a safe foundation so i can take it ot a tuner. i not sure about setting this up for boost

i couldnt find a 3 bar map file to compare to. im new to the whole boosted world. just trying to get my files right.

i changed the linear to 320 and offset is still 10.33. i did a small log the...

in the help section of HPtuners. theres a turtiorial that shows how to hook it up

i ended up coping someones 2bar just to get me running and wasnt aware it was different. that should be scaled to 320 right? and for the 0v offset is that 40?

heres copy of tune, maybe you can see something off besides lean

my scanner is reading lower then my boost gauge thats my problem. tonigh i did a small run and my wastegate open which is 15psi and the highest value on the scanner is 170kpa. 170kpa is around 10...

this is what im using. if you see something im missing feel free to let me know. i never done a boosed vehicle. i just want to get it close then take it to a tuner who has done boost.

i have a...

alright lately im having an issue. when i log my map and its set up for 3 bar. the scanner doesnt read as the does boost gauge does. when im in boost well say 5psi im scanner isnt reading accurate. i...

I had purchased what i was told a 3 bar GM map sensor off ebay. now not sure if it is one or not. heres the info on it

where it says CB A i have the following numbers under that

834 3113
...

i plan to run my setup on E85. I have motron #60s. fuel system is returnstyle. I was wondering if anyone could help me out on setting up my base tune so i can least fire. I did a search and didnt...

alright heres my question. I have a 99 4.3 blazer. i looked on HPs site and noticed they have licenses for this car. i also pulled up one of their bin tunes and looked over it. its very similar to...

a buddy of mine needs his 03/04 lightning looked at..not sure exactly what year it is. how can i get into that computer. is the software avaible?

so dan what was all involved in the programing it? im aware of hooking it up to laptop

bump