It'd be faster with the factory camshaft.
Type: Posts; User: C6_Will
It'd be faster with the factory camshaft.
Adjust the set screw on the throttle blade to hold it open a little more. Should help a little.
Could probably play with the throttle cracker table some to help with low speed stalling.
Post the tune. What vehicle did the tach module and pedal come from?
Trial and error. Start with small changes and see how it affects the car. Grow from there.
Post current file?
I'd start with raising the idle speed some and adding a little to the BRAF. Car should start and adaptives should adjust enough to get it idling decent. Would try to get a decent tune it as soon as...
The car that actually made me post this question is a buddy of mines 12 model grand sport with A&A kit and 6l80. We installed a flex fuel sensor and a set of fic1000s in it so I had to scale the...
I have been tuning for a while but have never personally knew a true way to go about modifying the Virtual Torque tables on gen4 stuff. Personally I just increase the bottom line until I see some...
Wild looking file lol. I'd honestly load the stock file back in it and start from scratch.
Look up Drive By Cable idle tuning. There are a few good write ups out there that can explain a lot better than I could in a quick response on here. Definitely need to get the O2's acting right...
Some of the changes don't look too bad but definitely far from done. Need to mod your misfire tables and some of the airflow tables under Engine Diagnostics to work right with the camshaft to start...
Should be able to input the new injector data and adjust the scaler for the larger throttle body (assuming it's DBW) and the car run halfway decent. A lot of very good remote tuners on here that...
Headers alone will definitely not hurt the car with a factory tune. Rode in many cars in my lifetime with bolt ons and factory tune that got beat on every night. Not ideal, I agree but isn't going to...
131811
If the injector data is correct, this should idle decent enough to get some data. Tune the MAF
Mind posting the factory file off of it?