Are you asking about file structure of user defined parameters or what ?
Type: Posts; User: geddys
Are you asking about file structure of user defined parameters or what ?
XDF - Ford Scaling table
I've been playing around with XDF for my 16 Mustang and found as following:
2D Matrix is referencing two 1D tables as its X and Y axis, but there is some wierd scaling...
Swap your injectors from cyl 8 and for example cyl 5 and see if DTC moves.
EQ Commanded is 0.9 to get EQ 1.0, when your car is warm it gets closer to 1.0, which means injectors have different...
On friends NA car we had issue that it would close TB on high rpm on 1st gear only @ WOT, and better TB model fixed this issue completely. I would suggest lowering TB effective area and try if...
Probably your VCT is in disabled status and MP14 has 0, 0 angles
Throttle body model data is correct ?
No problem, glad that it helped you
Engine->Fuel->General->Injector Control->Rail Temp->Offset Modifier and Slope Modifier
Add abit to offset at lowest temp cell.
Reasoning might be, that bigger injectors operate at minimal opening...