Search:

make sure your push rod is on the lifter in 6. it's very easy for them not to be on a liter and press off the block. pop valve covers off, bar the engine over by hand. look for a rocker that is not...

finally someone that gets it.

I enjoy the imports and the new sxs are fun to tune. I used to work at dodge that's what got me into the imports when DSM motors were a hot ticket. ended up buying one because I enjoyed them so much,...

it gives you the ability to see whats been done. also don't rely on a stock style controller or many aftermarket controllers. they do not read or calibrate the same most of the time and will cause...

Also, i see we forgot to mention the issue these engines have with the valve guides breaking off and clattering around on a valve at rpm this will cause knock readings. a mild annoying ticking noise...

i can't view his log because I wont upgrade my hp tuners software. but I think he needs to send us a stock file, ill update his fueling and timing to get him in the ballpark. Make Sure He Is Logging...

(I see You both Gentlemen are changing signifficantly FA Incr 44453. Changed factor from 0.0005 to 0.5 will push too much of fuel when I step on the pedal i think.)

you should put the stock...

i have tuned a lot of Mopar cars, trans tq management holds the cars back a lot on the early cars. i was building and tuning supercharged srt mopar cars before a hell-cat was even a concept. the...

not sure have to ask the man who started the thread. i just sent him a revised tune that should get him in the ballpark for his cam for fueling and it actually might like more timing at wot closer to...

yup, when he sends a log to verify we can add some more rpm to it. but if the valves are not at least stock valves they won't hold up to the spring tension and snap. jasper rebuilt motors for Mopar...

use the file i sent you

127392 Should Help With Your Fueling if you want a real tune message me. you have so much timing in your motor its not really safe.

sound like the rails are vapor-locking due to heat soak, put heat wrap around the rails and fuel line going to the rail.

127386

Lots of things you need to work on in tune. injector data not sure if it is stock. also need to know if you have a cam phase limiter installed. phase is enabled with timing advancement...

send me a file i will revise it send it back to you and see how it goes from there

I can get my hands on an RZR in late 2020.5+ what do I need to do and who do I need to talk to to get support going for these?



Again 2021 rzr turbos, who wants support? I do! what can I do to...

Again 2021 rzr turbos, who wants support? I do! what can I do to help? I'm losing customers because of a lack of support.

its a shame. I havent been able to find a place to submit tickets into on the main site

you would think so but it has parameters for period in pid

I believe we are missing functions in the vcm editor for most ford models, mustangs, and older f150s alike. use the same algorithm for MAf AIRFLOW lbs VS PERIOD. Older fords have pids like MAf...

They give the option for an access code I believe they call it. I wonder if it is the same Audi code for security-based parameters in the ecm. I even manually selected the supposed supported style...

i can scan the transmission ZF trans. will not pick up the ecm. I can't even start a ticket now to get support started on the software engineering side. why are you doing this to people.. where is...

We are here to enjoy the hobby of motorsports. I wasn't trying to upset anyone not even in the least. The only thing I want is more freedom for the end user. danmw2003 look into KESSV3, bench, obd,...

its like you are not understand anything all you see is EPA. I'm an ASE-certified master tech. Again you are blowing hot air. The point of all of this was the restrictions based on software. because...

EPA wrote the laws... people in California, Oregon, New-York are the ones making the push. It doesn't even matter. the fact is this is a software company for tuning. They are taking away features to...