Yes, many people do MAF only, but in order to have the best drivability, the VE needs dialed in as well.
Type: Posts; User: LS ROB
Yes, many people do MAF only, but in order to have the best drivability, the VE needs dialed in as well.
My opinion, the tune needs a bit of work. I'd start with your fuel injectors and make sure that all the data is correct. You can get the part number off them and pull a tune from the repository that...
Log Cylinder Airmass, Dynamic Airflow, Volumetric Efficiency, Injector Duty%, Injector Pulse Width Bank 1 & 2.
Log Cylinder Airmass, Dynamic Air, Volumetric Efficiency, and figure out what's up with your DTC's. Looks like you have a few codes popped up.
This is the best comment i've read all day! Having an absolute cackle right now!
Ahh ok. As always, appreciate the insight.
What type of issues can arise when zeroing out the first few cells when failing the MAF? I normally do zero the whole table but am probably just too novice to recognize the side effects.
:D
Makes sense. Thanks!
Shouldn't the High RPM Re-enable be set lower to 50-100 under Dynamic Airflow? Or do I have that backwards?
My experience is limited and never have i tuned anything with an automatic, but I would probably have a play with [ECM 12135] Idle Trans Drive Airflow to see if that helps.
Log dynamic airflow, volumetric efficiency airflow, spark torque management type, fuel cut torque management type, ETC torque management type, cylinder airmass. That should get you much more data to...
Tune and log should be included in your first post so that those who know how to help, can.
If you want, you can try this to see if it feels any better. Although it was a short log, I tweaked the MAF and VE so that should have you heading into the right direction now.
144706
LOL HPT should apply a filter to forum posting that populates the 2 choices in check boxes whenever FIC is detected.
LOL Shame on you Greg!:D Holding up progress waiting on that tool! Ahh.. im just messin with you. Hopefully, there's a fix or maybe ive just not got it dialed in as much as it should be but it seems...
Hey brother I appreciate that! No rush here, so, just whenever, if ever is fine. Thank you!
That's great news! I'm interested to see what comes of this!
Sorry. It's listed in my scanner as "Trans Current Gear."
Honestly, i've been on the forum for a couple of years now and if you do a search, you will find that the guys on here normally have to go in behind Dyno tunes to make them have good street manners....
LOL Man I laughed hard at this! Carry on...
Having fueling spot on seems to help minimize the effect, but i believe my BRAF and Scalar had something to do with it. Not saying thats your problem, but when i set my scalar back to stock, it...
I tried big mikes method but i must have missed a step (a couple of times) and could not make things work for me. I actually had someone help with the tune and with as much experience they have, they...
You can do either one first. I'd probably start with VVE first then do the MAF. If you're really feeling confident, then you can find the thread about tuning MAF and VVE at the same time. As a...
This is what i was not 100% on. Looks like SD is the option for me. Thank you for clearing this up Alvin!