Thank you TheMechanic
This looks to be what they cluster builder asked for
I?ll work with this and see if they can build a cluster
Type: Posts; User: RestomodC2
Thank you TheMechanic
This looks to be what they cluster builder asked for
I?ll work with this and see if they can build a cluster
You are so worong in all aspects of your continued insults and attacks
You don?t belong on this forum
Leave
You are way off base and flat out wrong
Second
You are taking this request for help off base then insulting me
Please don?t post cause your insults are NOT appreciated
PID tables are out...
I appreciate your input
- where do I get the data?
--- PID and ranges so that I can have a person program a cluster with this and know it works once plugged into the Harness and PCM???
RPM...
moving to top, hoping someone knows what I need to read the can within Gm podule that has been reprogrammed with HPTUNERS...
I appreciate your reply and thoughts on the aggravation & DD suggestion, however they don't have anything close to what we need, which is a 12.3 diagonal screen.
Having the GM ECU and HPTuners...
Hello-
The hardware is a Speartech Harness for LS that is made from a repurposed GM ECU.
Speartech says they set up the ECU using HPTuner software
Here's where I am at, I need the PID mapping...
Back at this again - PID mapping,
Does anyone here know where this data resides?
I can't be the first out there looking to be able to do this.
Yes, do not like what they have, and I don't recall that you can use your can data.
The can based clusters are out there, all sorts of SBC solutions with some compromises on speed or graphics.
...
Hello-
The hardware is a Speartech Harness for LS that is made from a repurposed GM ECU.
Speartech says they set up the ECU using HPTuner software
Here's where I am at, I need the PID mapping...