Thank you for that quickxstep
I should be able to get back in front of the vehicle in the next few days to try changes. Do you think the PI throttle controls portion and the trans anticipated...
Type: Posts; User: rico996tt
Thank you for that quickxstep
I should be able to get back in front of the vehicle in the next few days to try changes. Do you think the PI throttle controls portion and the trans anticipated...
still having issues, a lot of the partial solutions/threads I have seen seem to be dead ended so any help is most appreciated
looks like a lot of views though:)
I thought I would also post this in here for more exposure...
Hello all
I?m seeking help with a 2006 auto trans Mustang GT conversion to a manual trans configuration. I am admittedly completely...
Hello all
I?m seeking help with a 2006 auto trans Mustang GT conversion to a manual trans configuration. I am admittedly completely green on any Ford calibration aspects as I have been strictly GM...
thank you for the input. I thought I might be headed for that but was grasping for a quick solution.
is there info on how this function works? I have a manual tune in an E38 and am trying to get back to A6 function. Flashing (write entire) a tune with A6 already attached will not re-read out as auto...
I will try with movement but still would like to see it working during standstill or traffic jam scenario
well it still isn't resolved .....lots of looks but nobody seems to be having the same problem and I've tried so many combos with no result. I'm still hopeful someone in the community has worked...
I also realized today the vehicle has AC on it but no charge ...pressure is 0 KPA....could this be related?
similar issue I posted days ago with E38 controls. Latent speed parameter is 16 kph for low end....if sitting still everyone should be under this parameter so there must be something else. Anyone try...
grandam75 thanks for settings possibility but unfortunately that did not work either.
After looking at many iterations of the combinations and comparing to my scans im starting to think its time...
Hello all
did some searching but some threads left open ended. I'm having issues with an LS transplant, E38 controlled discrete fans. I believe the logic etc is correct but am getting fan one on...
yeah i would agree only a few attemps were driving, most others were sationary idle connection...well thanks for the extra input for everyone who might encounter this.
To Aaron407 i will check on any of those settings as I've been fighting this for many years and just recently run into this again on a vehicle. None of the earlier versions will scan and even 3.xx...
Small hiatus but back at it. Thanks for suggestion; am I to assume you are referring to “Spark TqMgt Type” ? that indicates “Trans” when “Torque Mgt Advance” is present. If there is another PID with...
hello all
Curious to see if anyone has seen this. E38 ECU powering a 6.0L/4L70e(trailblazer ss powertrain) in a '70s older car with '08 Silverado operating system. The 6.0L has a Magnuson SC on it...
Revisiting this thread for more info…input wise. I’m still having scanner issues as stated in all my above posts but now another vehicle I am working on has been added to the list. This is a 2006 E38...
well taking all previous posts suggestions (except #25.....really? lol) I have another 2bar converted file that drops recording randomly even after making 2 separate versions (in case one was...
well i was back in my troublesome vehicle today with less than satisfying results. Same thing but now it wouldn't even connect with just key on engine off. USB shows both devices are still present,...
Good suggestion jcrumpley as the plugging and unplugging over the years could be contributing to my issue. Here is the kicker though, i can go over to any newer vehicle and connect and drive around...
The reason I was asking on the SD OS is it seems my 3 troublesome vehicles are all SD converted OS. I can start the scanner with key on-no engine start and walk away for a half hour if i want and it...
to all posters above..are these SD tunes???
Thanks much for the speedy response :)
I would like to lock a 2005 C6 that i have been working on but when i go to do this the lock functions are "greyed" out. The status says unable to lock. I have never seen this before and i don't know...
Anyone have a 2 bar SD basic start cal for a 99 auto trans f body?? The car is going to have 42# inj on a completely stock motor and small turbo. Any help greatly appreciated :) ( nothing in the...