Atl+0176 = ?
Damn, that didn't work either
Type: Posts; User: 1BadLS6
Atl+0176 = ?
Damn, that didn't work either
I guess what you are seeing is normal. I had an active scanner session open yesterday and that was allowing me to cycle through to see the L cell entries, but when I closed that scanner session out...
On your KR setting layout can you change the view setting from average to last? This sets the default way it is viewed in the graphs table and can be changed with the buttons but I'm curious if last...
I noticed that too. I played around with my scanner and can't duplicate what you're seeing. I do see that if I click the little graph icon with the narrow red lines furthest to the right of C, View...
You are seeing a different value because in your graph you are viewing the average and not the last value. See the + - A L C in the top left of the graphs view? A is average, L is last, and C is...
Any update on how it turned out? I'm curious if the injector data from either source was good/close or if you had to go with something totally different
Found this file on the LS1Tech injector sticky, post #21 https://ls1tech.com/forums/pcm-diagnostics-tuning/1830132-injector-data-sticky.html. The numbers are different so maybe something to try.
...
Looks like you raised the transient instead of lowered it from the first file to the second one (.032 to .100). Try transient of .010 instead of .100.
I'm waiting on an A&A kit with Deka 80s for...
No, there are several ways to interface with widebands without pro. With AEM I know you can interface using a RS-232 serial connector connected to your laptop (likely need a serial to USB adapter...
As far as I know you can't. If it's not part of the channel list it can't be referenced. Would be convenient to just copy over the variable rather than the math that changes from time to time. ...
:cheers:
Not sure if you've got you WB working but I also remembered you have to enable the EGR in the VCM editor if your car didn't come equipped with an EGR. Under Engine -> Exhaust -> Gas Recirculation...
Your new equations are good too. They match the AEM manual.
In your scanner file from 8/31 you need to change the EGR Pintle Position sensor to EGR Sensor (voltage) in your channel list. Looks like you did correct this in your scanner file from 9/2.
In...