Search:

If i buy a MPVI3 will the credits that i bought with my MPVI2 to tune my Challenger Redeye transfer to the new tuner when i do a resync?

If you change the first cell in your ERT idle table i think it will do whatever you command it to rev to.

I hate to give you bad news. But i think you have a worn thrust bearing or possibly the crankshaft area that rubs against the thrust bearing. In gear the driveline load will push the crank in place....

I was hoping your tip would be helpful for my shutdown issue. I checked 44299 and mine is set at 6708 rpm already.

I was hoping your tip would be helpful for my shutdown issue. I checked 44299 and mine is set at 6708 rpm already.

Did you find a fix? I have seen several post with Whipple and P3032 code and\or P12b with it. Fix seems to be top secret. I have been chasing it for the last month. But the odd part on my 2019 Redeye...

I had a replacement PCM unlocked for my 2019 Challenger Redeye. I kept original PCM in case i want to go back to stock. I swapped it back in one day and it will start but transmission will not shift...

I cant help with your tune. I do see a couple logging issues. Your hi , lo, mid scale on spark retard needs to be a negative number in low box. -15 will show knock retard. 0 wont show if timing was...

I have seen several post about about a cog style belt works good on the old 6-71 and 8-71 blowers. But every cog setup tried on a Hellcat has caused major blower damage. The cog style belt probably...

I think you are asking and answering your question correctly. If you are successful in getting a clean log. You copy the trim cells with axis. then go to your ve table and paste them in. After you...

The Demon pcm has a little less torque intervention from what i have been told. The 2019 Hellcats took real tuners a little while to figure the torque limiters and i am sure some other changes to the...

I have been running a Demon pcm in my 2019 Redeye since it was new. Not the crate pcm. I run the 808hp factory Demon pcm. It has a few more tables that would benefit someone with tuning ability. I...

But no rpms left to build up any mph. If you leave with engine at close to 4000rpm at zero mph. Engine needs to make HP from 4000 to at least 7500rpm to make a good pass. If you shift at 5500 you...

If you click tool bar on the top left of your screen. I dont have my laptop with me but i think tab is labeled "tools" the drop down box has a calculator. The tool above calculator is a conversion...

Gearhead in Jensen beach\Rio area is a good local shop. Jeremy at Satera tuning is a good if not the best remote tuner if you want to have it tuned from your driveway. Remote tuning you do get a...

I think your stock Demon file is mislabeled. It does not look like it has the correct tables.

You hide the Tokens and other things very well on the HP website. I looked while i was logged in to my account at every box or link that i could find. Never did find a Token for sale. And you have...

Disappointing is a understatement. I can sum the book for anyone that has not opened one. Our test car is a Charger that has vortex or paxton type supercharger. So we estimate about a 30% increase...

I am happy to say i can now log in on forum and also log into my HP acct. Thank you.

My acct must be confused because i have been dealing with this issue ever since i bought my tuner from HP. i will try to reset the password again on HP site. Maybe you can help me with the reason i...

I need help explaining my problem with logging into forum and my HP Account. I can use one or the other. I am able to log into forums now under my screen name. When i try to log into my HP Acct that...

Now you have me confused. I have 2019 Redeye with bypass cable and tuner. I have a friend with same year Redeye as mine that tells me he wont tune his car and have warranty voided. So i really think...

I have to ask the big "WHY" i cant think of a reason to to convert a car to E85 if it does not have boost or a high compression engine the required race fuel. To put E85 on a engine that runs ok on...

I have that issue if i dont close out the scanner VCM. Have to hit the disconnect tab.