Search:

Type: Posts; User: DPC

Search: Search took 0.00 seconds.

  1. Replies
    18
    Views
    994

    So I was able to find a .bin file for the E41ECM...

    So I was able to find a .bin file for the E41ECM with mappacks. The problem is that is cost more than $3000... to rich for me. I would still need to create a .xdf file in tunerpro to use the...
  2. Replies
    4
    Views
    434

    I haven't done one without doing the immobilizer...

    I haven't done one without doing the immobilizer relearn so I don't know what the symptoms would be if I didn't. I also always do a transmission relearn procedure with my scanner when installing a...
  3. Replies
    4
    Views
    434

    Have you done the immobilizer learn for the ECM...

    Have you done the immobilizer learn for the ECM along with the crank angle re-learn when you put the ECM in? Also if the flash fails don't exit the program and try again, it can take two or three...
  4. Replies
    18
    Views
    994

    Donor truck is an L5P. Plan was to swap the...

    Donor truck is an L5P. Plan was to swap the engine, transmission and cluster. The fabrication/mechanical swap we can handle. If its going to be waaayyyy out of the budget we will do a 12V P-pump...
  5. Replies
    18
    Views
    994

    PM sent.

    PM sent.
  6. Replies
    18
    Views
    994

    It must be a difficult process to pull the .bin...

    It must be a difficult process to pull the .bin file for an L5P E41 ECM. HPT are the only ones I know of that can tune this platform and it has to be done with a HPT modified ECM/TCM. I agree with...
  7. Replies
    18
    Views
    994

    GM may I just don't know where it is. Usually a...

    GM may I just don't know where it is. Usually a few places will sell stock calibration files but I haven't been able to find anything for the L5P E41 ECM. I can't find anything newer then a 2016...
  8. Replies
    18
    Views
    994

    I have the ability to flash in factory updates...

    I have the ability to flash in factory updates with a pass through device using ACDelcoTDS but it doesn't give the me the option to save the file. Ford allows you to save the file or do you get it...
  9. Replies
    18
    Views
    994

    How do I obtain a stock L5P E41 .bin file to use...

    How do I obtain a stock L5P E41 .bin file to use with TunerPro?
  10. Replies
    18
    Views
    994

    "One of the primary purposes of TunerPro is to...

    "One of the primary purposes of TunerPro is to edit binary files. To do this, you must first load your binary file and its corresponding definition file." This is from the tunerpro help topics, from...
  11. Replies
    18
    Views
    994

    How do I obtain a stock L5P .bin file to use with...

    How do I obtain a stock L5P .bin file to use with TunerPro? Am I thinking correctly on this process, .bin file to TunerPro to .xdf file and then to HPT User Defined Parameters? I am looking for the...
  12. Replies
    18
    Views
    994

    L5P engine transplant

    Looking to transplant an L5P with a E41 ECM and T87A TCM into a 1984 K-10 pickup. I have done a transplant with an older Duramax (LB7) into a dedicated drag truck using the stock ECM/EFILive. We...
Results 1 to 12 of 12