Search:

Hi, I have modified engine and gearbox melodies.
I would like to restore the factory settings of the box.
I have factory engine and gearbox files.
How do I install factory gearbox tunes without...

Hello.
Which table should be changed so that there was no such fluctuation in rotation between 2nd and 3rd gear.
You can see it exactly in the video.
5 gear trans.

https://youtu.be/gKLefVTkVC8

Hi.
Will someone help with tuning the chest? Mustang GT 4.6 2006. Kickdown works with a long delay. I drive 60mph, press the gas to the maximum and wait about 2s for the gearbox to reduce. Is it...

Hi. Sebring js 2.7
I changed the wheels and now the speedometer is pointing wrong. Will the hp-tuner be able to calibrate? I don't see this option. Attached file.

I have replaced:

-Complete timing kit
-Phasers
-Solenoid phasers
-Hydraulic tappets
-Oil pump

What else can I do?

Hello.
I turned off the IMRC because it was rattling on the hot engine. After turning off IMRC, the engine runs quietly and properly .. Anything else I should change?

I set all tables to 0:
...

I have a leak in the place as above in the photo

Hello.
Is it possible to get a loud start on a hot engine?

Can you expand?

Is there any way to seal these places? For me, in Poland, shipments from the USA are waiting a long time

OK thanks.
I deleted the settings with the forscan, but they immediately go to a big minus.
I also have LPG installations and the corrections for LPG are also negative, so I can rule out fuel....

How can I do this? I do not know what you mean

Hello.
Will someone help me diagnose? The engine is running poorly.
I have bad fuel adjustments
There are no fault codes
The engine has been working well for several months and now suddenly there...

Will someone explain what exactly it is?:

"I highly recommend on all 3 valve engines to modify the oil bypass with a spacer to get more oil pressure."

Hi. I have camshafts with this number. :
rf-5l1e-6251-da 0632432370

.
are they standard or sport camshafts?

If I change the imrc tables to make the flaps open at 2000rpm, will that help me?

How to check their correct operation? Moving the levers manually on the fired engine, it reacts immediately and sets itself to its position

Can I open them permanently?

Hello. What is responsible for generating more power above about 4500 RPM? I have pressed the gas pedal to the max and after exceeding 4500 rpm it goes like crazy .. Sometimes it happens that it is...

Could you please change this in my file?

Hello.
Can someone help me set up a Mustang 4.6 2006? After stage 1, the engine automatically opens and closes the throttle while driving.
I keep the gas pedal in one position
File in attachment

Could you tell me exactly which parameters need to be changed? I just want the sound without replacing the cam..

Will you tell me which exactly is the option in the VCM editor? This is my file tune: 103007

Bama tuner offers a melody file that gives a ghost cam sound. I thought HP tuners would give me that.

https://www.youtube.com/watch?v=X7MrtwJqL_g

Hello. I have recently had hp tuners.
Can someone help me get the ghost cam sound? I know it can be done but I don't know how.
I've read a lot about it, but my hp tuners don't have that?

I can...