Ok sounds good i will add them. i did add injector pulse width b1 b2 and injector duty earlier today but i will add the others but looks like i have some work to do first I brought it in the shop...
Type: Posts; User: cody350
Ok sounds good i will add them. i did add injector pulse width b1 b2 and injector duty earlier today but i will add the others but looks like i have some work to do first I brought it in the shop...
ran a little log on my lunch break it was running pretty good at first besides really lean if i slowly accelerate hanging in one gear so most of the time i was giving it pretty good throttle then it...
Ok I tried to build a ve table off of what I gathered off of youtube n the forum and switched back to eXo3901's injector data does the ve graph look like it could start or run I have no idea if this...
ok yep up in the edit tab not in the engine. now I remember sorry about that
where is the stock ve table for this124664
BTR stage 2 turbo cam, stock fuel delivery with a walbro 450 stuffed in the stock bucket, 58 psi. I will give the other injector data another try. Do you have a good base ve table to start with i...
Hasn't been going into rep the last couple logs. I had a few things changed all at once with some help from another member but I believe it was the p0068 section that has allowed me to do a wot pull....
19418810 is the gm part # I put in the oem not aftermarket. Yes I will definitely try out your revised Thank you, much appreciated its amazing how helpful people are on this forum. i hope i can gain...
dont have koeo on this log but it is 99-100 kpa. at around 18:16:12 is where it goes rep 124529
Found this data on another thread seems to have everything124524. added in the 12308. do see any other important injector data i am missing?124525
Siemens 80lb injectors I got the flow rates and short pulse #s on a different thread. Know of anymore data for these injectors I see they are quite common but can't find all the info
I have a 2009 Pontiac G8 6.0 with a 7875 turbo I am trying to get this thing tuned. I just switched to the OS 2 bar because I was trying to sd tune on original tune but kept going into reduced engine...
Any suggestions on quality injectors for this build 09 g8 6.0l with btr stage 2 turbo cam, 78/75 vsr turbo, added flex fuel hoping to be around 550-600hp
this is the info they sent me with the injectors
123983
I have some 80lb/hr injectors for my turbo g8 build that are limited out. I have used the method of stoich x2 and halve IFR and halve IVT terms but when i plug in the flow rate numbers I got for...