Search:

Type: Posts; User: 2016SSlt1

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Got the idling/stalling resolved by reducing the...

    Got the idling/stalling resolved by reducing the torque tables in the idle regions slightly and dialing in the predictive throttle angle and tb effective area. Its driving smooth and coming to an...
  2. 2013 mustang coyote single turbo grams tb 90mm stalling

    2013 Mustang 5.0
    On3 turbo kit 80mm single
    1050 id injectors
    boss 302 intake
    grams 90mm tb
    stock engine

    I have only tuned a few fords, but I got everything figured out except for it stalling...
  3. Sbe LT1 with stock cam and LT4 hpfp settings

    I have a 2021 camaro SS with a completely stock engine, LT4 blower and LT4 fuel system. Does the leading and trailing edge angle need set to the LT4 setting or do they need left to the LT1 settings...
  4. Replies
    7
    Views
    1,282

    124800 The timing doesn't seem to drop in this...

    124800 The timing doesn't seem to drop in this instance but it does seem like it starts to go into DFCO then the fuel trims max. I just don't understand why.
  5. Replies
    7
    Views
    1,282

    I have disabled DFCO and CFCO but it didn't have...

    I have disabled DFCO and CFCO but it didn't have any effect. I haven't logged fuel trim cell but maybe I will. Even if I can prove it is related to a certain fuel trim cell I am not sure how to go...
  6. Replies
    7
    Views
    1,282

    stft maxing out when clutch pushed in??

    Is this a normal characteristic or any idea what is going on here? Cruising 50mph or so and depress clutch and go into neutral, Engine surges and sometimes stalls. I happened to notice when this is...
  7. Replies
    10
    Views
    1,186

    I see where your going with this. 628 kpa is...

    I see where your going with this. 628 kpa is about 90 psi So it will never feasibly be in those cells. I'm gonna dig into this car a little and see if I can find exactly what injectors are in it. Get...
  8. Replies
    10
    Views
    1,186

    If it is not halved then the values are maxed...

    If it is not halved then the values are maxed above 127 lb/hr from the 628 cell up.

    Also I have tried repolling with no luck. I ended up adding the channel Intake manifold absolute pressure and...
  9. Replies
    10
    Views
    1,186

    Thank you! Any clue why the Manifold absolute...

    Thank you! Any clue why the Manifold absolute pressure PID doesn't work in the scanner??
  10. Replies
    10
    Views
    1,186

    is this e38 converted to a 2 bar OS ??

    This is a friend of mines 2014 Camaro SS. He bought it used from auction with no history. Took it to a local dyno to see what it makes and it made 520 hp which he thought is low being that it is a...
  11. Replies
    4
    Views
    753

    Ford performance intake, stock injectors, BBK...

    Ford performance intake, stock injectors, BBK twin 62mm throttle body. It is NA.
  12. Replies
    4
    Views
    753

    Here is a driving log with it happening also,...

    Here is a driving log with it happening also, could it be something torque related limiting it? I didnt mess with the torque table at all since it is almost stock.123649
  13. Replies
    4
    Views
    753

    2005 Mustang GT random WOT timing dip

    Can anyone make any sense of the random timing dip that is occuring in this log at -2750?? Intake and catless exhaust only. I have other logs with it happening at 3-4000 also. Seems like some kind of...
  14. Replies
    4
    Views
    866

    e67 LSA e85 hard start and surging idle

    Camaro ZL1 Built LSA, ported stock blower, 2.45 upper/9.17 lower, btr stage 3 cam, ID 1300 injectors, 105 throttle body, BR9ES plugs (occasionally runs 200 shot). Tune is in Maf only right now. I...
  15. Figured it out. I was logging intake manifold...

    Figured it out. I was logging intake manifold absolute pressure and found out I need to log manifold absolute pressure hi res to get the proper reading.
  16. 2021 Lt1 with Lt4 blower swap map sensor incorrect reading??

    I am using the map sensor breakout from the maf 3 wire map to the 4wire tmap sensor. I have the Lt4 tmap sensor in the rear port of the Lt4 blower. Set to NA-TIAP, Linear is set to 425kpa, offset is...
  17. Replies
    2
    Views
    869

    I got the timing to be much more stable but now...

    I got the timing to be much more stable but now the IAC still is over reacting. Do I use the proportional airflow high and low and reduce the values to slow it down?? From my understanding, as the...
  18. Replies
    2
    Views
    869

    Surging idle in open loop

    99 5.3 stock with 228/230 112 + 4 lsa cam. My idle is surging pretty bad until the truck goes into closed loop then it seems to get much better. It is in SD right now as im just trying to dial in my...
  19. Replies
    8
    Views
    1,627

    I found out the wrong style of o2 sensors were...

    I found out the wrong style of o2 sensors were being used! Now I am getting readings and can start dialing in the tune. I guess the segments that were there are actually correct or atleast correct...
  20. Replies
    8
    Views
    1,627

    Okay I am going to attempt segment swapping it. I...

    Okay I am going to attempt segment swapping it. I found a file with the 4l60e trans its equipped with. Do i swap over all the segments that have a different number and leave the ones that match...
  21. Replies
    8
    Views
    1,627

    Yes it is licensed. I made a few changes and...

    Yes it is licensed. I made a few changes and reflashed it. It does run but not well. I still have to tune it but it backfires out the exhaust and my primary o2 readings stay at .447 for both banks. I...
  22. Replies
    8
    Views
    1,627

    Sooo is this thing a brick or can it be segment...

    Sooo is this thing a brick or can it be segment swapped or is any some other solution??
  23. Replies
    8
    Views
    1,627

    Do I have the correct OS??

    Im working with a swap vehicle. 5.3/4l60e out of what I believe was a 1999 silverado. The wiring was all complete and pcm installed when I got the vehicle. Under the Calibration details it comes up...
  24. Replies
    3
    Views
    883

    Do you have a log of it surging??

    Do you have a log of it surging??
  25. Replies
    4
    Views
    1,284

    I don't have my laptop on me right now but can...

    I don't have my laptop on me right now but can post the calibration file up later. Thanks
Results 1 to 25 of 38
Page 1 of 2 1 2