Search:

Alvin,

Is this something you can do with your emailing tuning service?

The system is returnless and the injectors are stock, I will take a look at my fuel flow rate now. I have a after market MAF tube, didn't think about that. thanks

Everything is stock, and fuel pressure at the rail is about 50lbs. I don't have a wideband so I'm reading off of narrowband.

Hey everyone, I am having an issue with my 6.0 swap. Both banks are lean (LTFT max @25) at idle. I have done a smoke test with no leaks, when I get on the throttle it balances out. Now I have a...

I have L96 6.0 with a misfire on cylinder #5. Here are the things I have done, change the plugs, swap wires, injectors and coils and the misfire does not follow, no smoke or oil leaks anywhere. Below...

Hey everyone, having an issue with my swap (L96/4l80e). there is a misfire on cylinder #5, I have swap coils, wires injectors and wires and the misfire does not follow. I have competed compression...

I'm having a problem with my tune file, the truck runs good while in park but once in gear it sputter (Limp Mode) and I lose the pedal control my MAF is not reading I got these two codes also (P0068,...

I appreciate the help.

Thanks, Have you had any problems with your MAF?

Looking for a 2013 Silverado L96 6.0 tune file. I'm having problems with the MAF, I just want to compare files.