Ok so I have the new oil restrictor installed. Went with a .03" or .76mm. This seems to have helped. I haven't driven the car still trying to get the idle tune dialed in. Also the oiling issue killed...
Type: Posts; User: frydrce
Ok so I have the new oil restrictor installed. Went with a .03" or .76mm. This seems to have helped. I haven't driven the car still trying to get the idle tune dialed in. Also the oiling issue killed...
102904
So it appears that I had two issues. My scaling was off and also something happened in my tune when I converted to the 3 Bar OS. It wouldn't fail over into SD mode. So I went back to the base tune...
Well I installed the AEM. It works and I was able to get the T/A to fire up but Im pretty sure I have a scaling issue. SO that will be the next round. Ill try to scale it and do some table work.
Is it possible to wire in an AEM 3.5 bar (30-2130-50) in place of the factory MAP? I dont need the full scale yet but would like it for future growth if needed but also would like having an npt...
Is it possible to use an AEM 3.5 bar map sensor if I scale it in? Im not planning on using it above 25psi but need the ease of using an npt sensor in my manifold. My plan was just to wire it in the...
Appreciate it. I see that I was in the wrong place. System>General>Auto Start Stop is the actual tab.
Post your file.
Has anyone had any luck with the auto start/stop option? I cant seem to disable it via the Idle Auto Shutoff. I also just tried to keep it enabled and max out the time. Neither option seems to work.
Download the newest beta and try to reread the ecu. should pop up. If not try tc-1791.