Thank you.
Type: Posts; User: fsperformance
Thank you.
48692
Trying to connect to 2014 f150 with a 5.0 to reset speedo and wont let me connect says ecm security timed out. HELP!!!
Thanks guys it dont pay to get in a hurry
08 6.0 Max 92 mph is as fast as she goes what am I missing or what do I need to raise, lower, eliminate or get rid of to set it higher
No need Bill prob fixed user error thanks for help though
I can open bethaniestockyukon1 edit it and flash it that works fine and is probably all i need to be doing i just like to save every file every time i make a change i have deleted bethaniestockyukon2...
Even after reboot of laptop
Yes I tryed flashing bethaniestockyukon2 three times and each time it came up with the lic screen
Flashed wifes yukon and saved factory tune as bethaniestockyukon. Saved first file as bethaniestockyukon1 flash worked as should no problems been flashed for about two mouths. Last night I made some...
Can hp tuners command a regen? Have an 08 Duramax in a 4500 needs to be regend.
I was aware that the 05 was returnless but I will be running a return style fuel system. So really as long as I copy the 05 injector tune to my 02 pcm it should get me close enough to start tuning...
5.3 Swap in a 70's nova.
Engine: 02 5.3 Stock short block rings been filed for boost
Cam: Custom Grind 266 dur Stock lifters comp push rods
Heads: 317 Some work done nothing major
PCM: 0411
...
How big of steps do you suggest to take on the ppm at a time? Im having the same issue on a 98 gmc 1500 cant enter tire size or gear ration.
What are the odds that disableing the vats on an 03 gmc sierra will let the radio work reason i ask is because a guy installed a salvage unit in his truck and radio says locked. I already have a time...
My app key went to an email that is no longer good what do I do Please Help!!!:doh:
2002 Yukon my wifes daily driver nothing real special on the tune no knock seen on log. Instead of me taking two hours of my time and replacing it do you think it will be ok to turn the mil off for...
I thought 1345 was the code for timing corralation problem
1351 high voltage did pin point test via mitchell one pin point test found nothing wrong with sensor or wiring told me to replace pcm sensor was only 33.00 my cost so i said what the hell ill try...
best i can remember a 350 truck has 2 pre and 2 post a 305 truck has 3 pre and 1 post
Can i not just turn all the o2's off but the front 2 and whey grind the hole mine timed right up via the modis.
I did a 305 to 350 swap having trouble with pcm 1351 code did pin point test and came up with needing a pcm can i purchase a salvage pcm and disable vats and truck will start? Should i purchase a new...
Is there a build date break on the vortec stuff or am I able to tune this. I do not own hp tuners but my local guy said he is going to charge me for the credits rather or not he can do it im only...