Was the AEMnet used with VCM scanner using the boost gauge?
Type: Posts; User: Boosted CC
Was the AEMnet used with VCM scanner using the boost gauge?
There is something wrong with the software because we have tuned everything to have the fuel system to act like a Hellcat fuel system with rising pressure. 40 PSI at startup and 80 PSI at WOT, no...
I have a 2019 Ram 1500 Classic that I installed a TRX fuel pump assembly with the Dual fuel pump control module kit with harness from Tapped Performance. I used a -8 AN returnless fuel line to the...
My Whippled Ram 1500 Classic is getting the P0308 code, what fixed it?
What fixed the issue? My 2019 Ram 1500 Classic is doing the same.
My Ram 1500 is a 2019 regular cab 5.7 8-spd with a Whipple supercharger, Stainless Works 1 7/8" LT's mated to Corsa exhaust, MSD coils, colder NGK plugs, V6 fan swap, stock engine. Fine I noticed...
This my Ram with the 203* thermostat, I recommend setting these temps 2-3* above the thermostat temps, or the fan will fight with the thermostat.
113197
The truck comes with a single speed fan for the A/C and clutch fan on the Hemi, I removed the clutch fan and swapped in the 2011 Ram 1500 3.7 V6 2-spd fan already that can be easily be changed in the...
Here is my Stock file of my truck and the newer Gen 5 Ram DT with the 5.7 Hemi PWM fan, doesn't appear to be any differences except it is set to PWM Linear and I tried that on my truck with no luck.
I tried swapping in a Gen 5 Ram 1500 PWM fan into my 2019 Ram 1500 Classic Gen 4 with correct wiring and control circuit connected to pin 82 on the PCM like the PWM trucks have wired and fan settings...
I want to put the Gen 5 Ram 1500 PWM fan on my 2019 Gen 4 Ram 1500, and have found all the parts, but can't find any info of changing the Fan setting to PWM in HP Tuners will enable it or not,...
What's odd is the modification Dept can't open this file?
It didn't give me the option
Well I guess I won't buy the unlocked PCM until HP Tuners give me a straight answer about this.
I have a 2019 Ram 1500 Classic that I installed the security bypass on and I did a stock read this morning and with the internet connected I do a entire stock read and open the file it is not showing...
You need to stop tooting your own horn, everyone from your Facebook page and Chrysler 200 Forum has already heard all of this, you sound very stuck on your self.
Humble yourself.
I have a 2016 Hemi Ram 1500 4x4, I did the V6 fan conversion and removed my clutch fan, it is a nice plug and play conversion, only down side is it is only a single speed fan, these fans are stock on...
Thanks for the update!
I cant wait for the tuning to come out, I want to boost one of these 4.7's to the moon and back!
The Minivan thing, was the same thing I was thinking!
That's odd I have never been able to read my 2002 4.7 Dakota, I hope I can tune mine in the near future, theres is Justune in KC that picked up 30hp and 50ftlbs at the rear wheels using HP Tuner's on...
I really believe they intended on tuning the JTEC PCM's but they discovered it would be too challenging or not worth there time, I kinda wish they never would of brought it up, because now I'm...
I also need it!
I need the latest Beta to work with my 2002 Dodge Dakota, where do I get it?
Thanks for being so helpful Bill.