Working on 3rd gen coyote swap and need to disable pats. Can i just flash a control pack OS into it or?
Type: Posts; User: Turbomustang93
Working on 3rd gen coyote swap and need to disable pats. Can i just flash a control pack OS into it or?
No one?
CM2100
OS 61300434AM
I have this in a 2008 F-250 now and I am trying to tune it for the best fuel economy. Im not interested in violent power just reliability and fuel economy.
There is...
I swapped a 2008 6.7 cummins into a 2008 f-250 previously 6.4 powerstroke. I am running the stock 5R110 trans and using the ford ecu to shift it. How ever the ford ECU keeps limp modeing and stops...
Did you ever get the transmission tuning done?
I'm looking for a Solution to my issue. I am working on a 2013 coyote Twin 67s . The problem is that no matter what RPM my 2 step is set on ( from 3k to 4k ) the car will only build 3 to 4 psi on the...
I tried that already . No change
Did anyone ever resolve this issue ? I am having the same issue. I have a forced induction 2013 with return style and ID1700s and at idle it is commanding 1.00 and the actual is .67 to .70 and the...
ok thanks for the responses I was hoping there was a way to use the factory wide band with the AFR error . I will use the fuel trims then it will get the same result . thanks .
Can someone help me out on making a AFR error table for Ford . I have done this several times on GM stuff but I cannot get it nailed down on this ford stuff . im working on a 2013 mustang
I tryed raising that one already it caused other issues and didnt help ..I tryed several other things in the trans tq management with no luck
OK don't mind the craziness in this calibration . I am basically swinging for the fences on this one as a last resort . I am hitting a limiter or something at 350 ft lbs I have tried everything and...
IDK if I am not finding the right OS for this transmission or what the deal is but when I segment swap it the trans wont go into first unless it is manually shifted into it . I have tried a few...
IDK if I am not finding the right OS for this transmission or what the deal is but when I segment swap it the trans wont go into first unless it is manually shifted into it . I have tried a few...
Is there a way to lockout 1st gear in the tune?
Does anyone know how to make the transbrake hold in 2nd gear on a 6r80 .
this is the tune
Here is a log from my truck maybe someone can see something that I am not . I now have the boost over stock but the truck still likes the stock tune better it has a lot more power on the stock tune ,...
Ill try to compare it to a srock tune from the repository just to be sure. It is the original tune from the truck its brand new only has 500 miles on it.
Im going to try to get it in at the dealer to have it flashed back to stock. There has to be something missing in the software. I loaded the stock file back in that i originally read out of the...
this is the raptor tune I used to build my tune
here is a few logs
here is the stock file I have loaded back into the truck but it still way down on power I threw it on my dyno last night and it was only making 240hp to . I tried the stock file and the one I altered...
The truck is making 30psi of boost and going in the negitive on timing on the stock tune and raptor tune. Just loading the stock untouched tune in should put the truck back to the way it was factory...
hopefully someone can point me in the right direction