Search:

Type: Posts; User: Weston@HPTuners

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. In theory it should work with a proper ELM327...

    In theory it should work with a proper ELM327 compatible like the Kiwi 2+. Our MPVI2 should support K-line / ISO9141 in the future as well, but just didn't with its original firmware...
  2. Assuming that TrackAddict is able to connect to...

    Assuming that TrackAddict is able to connect to the interface and is failing when it goes to connect to the vehicle (the status dialog or channel selection screen would get to at least "Connecting to...
  3. Replies
    1
    Views
    109

    Distance is a calculated field based on GPS...

    Distance is a calculated field based on GPS movement over time, so unfortunately there's presently no logging or export of that.

    We have had some users add this to their CSV file via an Excel...
  4. There are a few things I can think of that may be...

    There are a few things I can think of that may be happening here:

    1) If your car has multiple controllers that respond to standard PID requests (many modern cars do these days), then it's possible...
  5. Replies
    7
    Views
    872

    I wouldn't think so, although the older version I...

    I wouldn't think so, although the older version I have is sending GSA, RMC, GSV, and GGA. I just tried ignoring the GGA's, but it still seems fine.

    My best theory so far is that it's related to a...
  6. Replies
    1
    Views
    34

    Presently, there's no user control over this. It...

    Presently, there's no user control over this. It is automatically based on your best lap so far in the current session, which is the only full lap data that it retains in memory. It was designed this...
  7. Replies
    2
    Views
    30

    This usually comes from a GPS issue or a timing...

    This usually comes from a GPS issue or a timing point set wrong. The latest update to TrackAddict (v4.3.7) includes some improvements to help keep this from happening in other cases.

    There's not...
  8. I regularly use the BT-Q818XT as my primary GPS...

    I regularly use the BT-Q818XT as my primary GPS at the track, always with great results, and have done so for about 4 years now. It's hard to say what's happening here without seeing the raw NMEA...
  9. Replies
    7
    Views
    872

    Ideally, TrackAddict wants RMC, GGA, and GLL...

    Ideally, TrackAddict wants RMC, GGA, and GLL messages, with RMC and GGA being the recommended minimum. It should be able to get away with just RMC alone, but some data may be missing. This applies to...
  10. Hi Bill, Although I'm not always very visible...

    Hi Bill,

    Although I'm not always very visible here (especially lately), I do keep an eye on the forums for issues and potential improvement in our products. Same goes for bug / crash reports and...
  11. Replies
    7
    Views
    388

    It's unfortunately a bit buried, but current...

    It's unfortunately a bit buried, but current Android standards have us putting it in: /Android/data/com.hptuners.trackaddict/files/

    Phones with an SD card will likely have two "drives" appear when...
  12. This is most likely a difference between the OBD...

    This is most likely a difference between the OBD and GPS reported speeds, with one app using one and the other app using the other. GPS speeds can jump around like that if there's poor signal...
  13. Replies
    7
    Views
    388

    A few things to check first: 1) The vehicle's...

    A few things to check first:

    1) The vehicle's engine should be running, or at least ignition on. We likely wont get a connection if the car is only in accessory mode.

    2) Tap on the 'i' gear...
  14. Interesting... Would you happen to have GPS or...

    Interesting... Would you happen to have GPS or NBP set to Bluetooth as well? There is a situation with Android where if you have multiple devices set to Bluetooth, and it's not able to connect to one...
  15. Replies
    1
    Views
    127

    At this time, we don't have any plans to add DJI...

    At this time, we don't have any plans to add DJI camera support. These cameras all use different control protocols, and the manufacturers usually don't publish this information, so that severely...
  16. 17 Hz is fairly good for OBD polling over...

    17 Hz is fairly good for OBD polling over Bluetooth using the ELM protocol.

    Wireless latency issues are usually the biggest limiting factor, so your best bet would be to use NBP and just broadcast...
  17. Quite likely, Torque is running in the background...

    Quite likely, Torque is running in the background and preventing TrackAddict (and other apps) from connecting to the Bluetooth device, and it's only after you go into Torque and specifically tell it...
  18. Replies
    4
    Views
    379

    90283 The manual install ZIP file contains...

    90283

    The manual install ZIP file contains both Windows and Mac versions, so Mac users will want to simply ignore all the .exe and .dll files.

    Fortunately, the process is fairly simple for Mac,...
  19. Replies
    4
    Views
    304

    I'll get the recording state added in the next...

    I'll get the recording state added in the next update (v4.3.6 or higher)... In addition to the "KA" keep alive messages that TrackAddict currently sends, we'll now also send an "R1" or "R0" to...
  20. Replies
    4
    Views
    736

    On Mac trackpads, a two-finger click will do it....

    On Mac trackpads, a two-finger click will do it. On the Magic Mouse, you may need to first enable the "Secondary Click" option in the System Preferences, and then clicking on the right side of the...
  21. Replies
    1
    Views
    159

    Yes, Airplane Mode should work to avoid...

    Yes, Airplane Mode should work to avoid interruptions, as long as you make sure to turn Bluetooth back on, as well as WiFi if you are using any WiFi devices.

    On iOS, this requires an external GPS...
  22. Looks like your data is in a CSV format that...

    Looks like your data is in a CSV format that should work... You would most likely need to double-click on the data file in the Input Files list, then set the "Session Time" selection to either...
  23. Most likely, it's just not able to save or update...

    Most likely, it's just not able to save or update the value in your system's registry due to some account security setting. A quick solution is usually to right-click on RaceRender, choose "Run as...
  24. Replies
    4
    Views
    304

    There's a bunch of GPS-specific data handling...

    There's a bunch of GPS-specific data handling going on in several places within the app, so it's unfortunately not likely to be practical to accept GPS data in a universal way via an NBP source. You...
  25. Yes, the OBDLink MX WiFi should work for iOS. You...

    Yes, the OBDLink MX WiFi should work for iOS. You will need to make sure your device is connected to its WiFi network, and then set TrackAddict's OBD mode to "WiFi".

    Alternatively, the PLX Kiwi 3...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4