Search:

Type: Posts; User: Higgs Boson

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    24
    Views
    1,279

    my tb scalar is stock with a 103 and whipple...

    my tb scalar is stock with a 103 and whipple setup.

    don't waste your time.
  2. MAP - Hi Res has been in the channel list for...

    MAP - Hi Res has been in the channel list for years.

    Manifold Absolute Pressure - Hi Res
  3. How to tune MAF and Speed Density is info from...

    How to tune MAF and Speed Density is info from the GenIII days, you should read the threads and stickies in that forum.
    How to tune Virtual VE/SD is info from the GenIV days, you should ready the...
  4. do we have access to the 2020 Yukon with a 6.2...

    do we have access to the 2020 Yukon with a 6.2 and 10 speed? I would think we would, but I haven't tried it, nor do I know if they are still running the E92A. What about the TCM?

    Thanks.
  5. Replies
    33
    Views
    1,591

    maybe he was saying you have to: adjust maf...

    maybe he was saying you have to:

    adjust maf AND ALSO combination adjust ve together with vtt
  6. Replies
    33
    Views
    1,591

    VVE. not a secret. my torque tables are stock.

    VVE. not a secret. my torque tables are stock.
  7. Replies
    2
    Views
    185

    spark lead should be set to MBT using a dyno. ...

    spark lead should be set to MBT using a dyno. anything else is a guess.
  8. You probably need to tune your VVE before you...

    You probably need to tune your VVE before you worry about your VTT
  9. interesting

    interesting
  10. you are probably using Basic view. Change your...

    you are probably using Basic view. Change your setting to Advanced
  11. It's under Exhaust tab now

    It's under Exhaust tab now
  12. Replies
    33
    Views
    1,591

    I am not seeing high RPM timing issues, but I do...

    I am not seeing high RPM timing issues, but I do see 0 "knock" up to 4100 RPMs then at 4100 it shows about 14 degrees all at once.
    Coincidentally, this is the same RPM that IVT flips from 430...
  13. Replies
    33
    Views
    1,591

    try something for me real quick. put your VTT...

    try something for me real quick. put your VTT all back to stock go to your Fueling section / Open Loop and Copy your IVT Gain E table and paste it to A - D.

    see what that does for your timing...
  14. Replies
    41
    Views
    23,096

    I don't really do that anymore, this is a bit of...

    I don't really do that anymore, this is a bit of an old thread. Now I leave DD stock and possibly lower it in some part throttle areas when needed.
  15. you can check for sure by setting your knock...

    you can check for sure by setting your knock sensors to 32 and see if it stops, of course be careful and don't leave it this way. if it shows knock like that then it isn't from noise (knock sounds)...
  16. As has been mentioned, this is not knock or ping...

    As has been mentioned, this is not knock or ping noise related.

    I recommend exploring torque table/management issues (not talking about limiters).
  17. torque model is wrong and/or VVE is not tuned

    torque model is wrong and/or VVE is not tuned
  18. Replies
    2
    Views
    288

    1. doesn't matter, I usually rough in the vve,...

    1. doesn't matter, I usually rough in the vve, then tune the maf, then dial in the vve exactly.

    2. yes you can but there is no reason to do that unless you have some specific problem running a maf...
  19. Replies
    12
    Views
    939

    reducing your airflow models will tell the ecm...

    reducing your airflow models will tell the ecm you are making less torque and lean out your mixture, that's called a bandaid with negative side effects.

    correcting your torque model allows you to...
  20. Replies
    55
    Views
    3,897

    Did you miss this eariler?

    Did you miss this eariler?
  21. Replies
    4
    Views
    308

    without looking at the files, I will guess Peak...

    without looking at the files, I will guess Peak Torque is maxed out or raised too high to meet the PE Tq criteria.
  22. it doesn't fix the issue you are having

    it doesn't fix the issue you are having
  23. Replies
    2
    Views
    230

    none of them come with it. www.dsxtuning.com

    none of them come with it.

    www.dsxtuning.com
  24. you can change the VTT Editor but the normal...

    you can change the VTT Editor but the normal tables in the calibration reference the last value
  25. Replies
    2
    Views
    261

    https://www.hptuners.com/vehicles/

    https://www.hptuners.com/vehicles/
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4