Search:

Type: Posts; User: Mike Poteet

Search: Search took 0.00 seconds.

  1. LB7 Edelbrock heads. Many other mods where to start for low end very low power

    Hello, I have been around HP tuners for quite a while but new to tuning diesels. I've been searching the forum and working on gathering information but am looking for a few tips on where to start for...
  2. Well damn, I did find the 02 low reference...

    Well damn,

    I did find the 02 low reference circuit 3111 tied a PCM ground circuit pin 73. Didnt think it would matter but under the diagnostics for an 02 code it says the low reference is tied to...
  3. I've been wondering about that. The 02 connector...

    I've been wondering about that. The 02 connector because of the harness had to be re-pinned with different terminals and a different connector to match the harness ( it was a custom built harness )...
  4. changes still 02 @ 0

    ok i made those changes and started it up. I attached a log file and the most recent tune file so you can check my work. As a note I have also tried spraying carb cleaner in the air intake to try and...
  5. now that you mention it I did have a fellow...

    now that you mention it I did have a fellow friend tuner Mark Romans try to help and he did hook his wideband up to see if he could help figure it out. Didnt know he disabled closed loop. I also...
  6. log files

    Well I'm getting there, reading through forums and learning how the program works. I'm sure this still isnt fully what you need but wanted to log it to see anyway. Found lambda and boost lo res but...
  7. second log file

    Ok I added the channels I could find and run the log. See I sent the wrong file to start with so sent an older one that may not have much useful info. Still didnt locate lambda or boost lo res. Also...
  8. Log file

    here is the first log file
  9. Ok I have logged what I had so I can send you...

    Ok I have logged what I had so I can send you something. I will look through to find more channels and send another asap. I did not find an actual Lambda channel. Also where can I alter the desired...
  10. For the pressure sensor in the manifold 12643955....

    For the pressure sensor in the manifold 12643955. For the inlet tube I have 12644807 and the MAF Delphi AF10142 I will find the tables and make some adjustments as I understand them then try it and...
  11. 2008 LNF married 2011 LHU computer & harness Help......

    Ok so here is the beast I have to tame. I have a customer with a nice custom roadster with a 2008 HHR 2.0 LNF installed in it. To control it a ECU from 2011 Buick Regal CXL 2.0 LHU and harness. Also...
Results 1 to 11 of 11