go read the 2nd post carefully, your answer is there
Type: Posts; User: suprmario96
go read the 2nd post carefully, your answer is there
i would very much like for this post to be stickied
it has to be something with your spark timing. minimum spark at 30*? also MP15 table very jagged, try smoothing? also your idle rpm error is not updating the info, it's just stuck at 750?
wouldn't you need an ethanol content sensor to get that reading?
92903
92902
they don't list 90 as an option did you mean 88's? here is the link:
https://www.deatschwerks.com/ford-calibration-summaries
thank you sir, that makes sense, was just having trouble with what each party calls the same parameter.
nope, logging showed that difference right away. I swapped them and was within 5% fueling. I'm going to call DW and have them clarify, I think they're using SCT naming conventions or something....
Hello all this is how I did it. Not a pro so not labeled as "how-to." This was done after installing https://www.deatschwerks.com/18u-00-0078-8. Their injector tuning data is available on their...
I don't know why you're thinking that they're wrong but a simple way you can check if the period is being calculated correctly is divide 1 by the frequency/Hertz value it'll then output your period...
The following link coincides with my understanding of MAF transfer function:
https://www.svtperformance.com/threads/is-your-car-tuned-correctly.897172/
The question now becomes where do i...
I am a complete novice when it comes to Coyote tuning but here are some things i noticed:
-i see that your running into 6* of knock retard, are you running 87 octane or bad 93?
-your fuel trims are...
no i appreciate your reply. i've tuned in the past a much simpler 0-5v MAF with an SAFC and an innovate LM-1 but it seems with this platform since everyone is not 100% sure they cannot give a factual...
anybody? i have mixed information from this forum, some say you tune the fueling by way of the MAF v period table and others say thats a hack way to add fuel and not the correct way but no one...
Hi all,
Looking for some pro advice on how to calculate/guesstimate the initial MAF table values for 7psi wastegate spring.
What I have done so far is log EQ error and applied by multiplying...